Goldmund

An integrated stereo amplifier, the smaller sibling of the Telos 590 NextGen. An all in one solution with a select range of digital and analogue sources.

A premium wireless active loudspeaker. The Samadhi 3-way speaker has 3 built-in Telos amplifiers and 4 drivers, totaling 700W per unit. Of the three in the wireless range the Samadhi is the largest.

Built-in 700 W Telos amplifier per unit.
2 x 200 W for tweeter & medium.
1 x 300 W for woofer.

1 x digital S/PDIF input.
1 x wireless audio input.

A premium wireless active loudspeaker featuring an integrated powerful 650W Telos amplifier. Of the three in the wireless range the Satya is the mid-size loudspeaker.

Built-in 650 W Telos amplifier per unit.
2 x 175 W for tweeter & medium.
1 x 300 W for woofer.

Elevating the auditory experience to new heights, we proudly unveil the Mimesis Signature, a convergence of analogue finesse and digital prowess. This symphony of audio excellence introduces a paradigm shift in preamplification technology.

2 x Digital S/PDIF, 1 x Toslink Optical, 1 x USB AUDIO (up to 384 kHz PCM up to DSD512)

ON/OFF power switch, key Voltage input selector, RS232 Command connector

Frequency response (These values for any level to maximum output level)

+/- 0.1 dB, 10 Hz – 20 kHz, +/- 1.5 dB, 10 Hz – 100 kHz, +/- 3 dB, 10 Hz – 200 kHz

Distortion with 1 V RMS output level, 80 KHz measurement bandwidth, 600 Ohms termination impedance

THD unbalanced in to unbalanced out < 0.005% (-90 dB) flat with frequency

IMD unbalanced in to unbalanced out < 0.002% (-80 dB)

117 or 234 V (switchable) Fuse 2.5A for 110V Fuse 1A for 220V Input voltage range: +/- 10 %

A preamplifier with a wide range of purely analogue inputs. The 37S is a two-box system that includes a separate power supply. This product can be paired with any high-end power amplifier.

These values for any level to maximum output level.
+/- 0 dB, 20 – 20 kHz.
+/- 3 dB, 0.2 – 900 kHz.

With 1 Vrms output level, 80 KHz measurement bandwidth, 600 ohms termination impedance.
THD unbalanced input to unbalanced output: 0.002 % flat with frequency.
THD balanced input to balanced out: 0.001 % flat with frequency.
IMD unbalanced input to unbalanced output: 0.002 %.
IMD balanced input to balanced out: 0.001 %.


Input impedance: 39 kOhms.
Maximum input level (balanced): 9.6 Vrms.
Maximum input level (unbalanced): 4.8 Vrms.

Nominal line voltage: 115 or 230 V.
Input voltage range: +/-15 %.
Maximum power consumption: 70 W.

Crafted under the visionary guidance of the Italian artist Claudio Rotta Loria, the Goldmund Apologue remains an everlasting cornerstone within the annals of Goldmund’s history.

Now, introducing the Apologue by Pinel et Pinel x Kongo – a mirror image of the original Apologue, yet infused with the company’s 36 years of relentless technological advancements.

This limited edition, while maintaining its signature active design enhanced with cutting-edge technologies, is adorned in an exquisite leather sheath crafted by the renowned Parisian atelier Pinel et Pinel and hand-painted by urban artist Cyril Kongo. Celebrating creativity and imagination, this new edition emerges as a true masterpiece—an extraordinary work of art.

The baby of the z-frame wireless range the Prana is a premium wireless active loudspeaker featuring an integrated powerful 600W Telos amplifier.

Built-in 600 W Telos amplifier per side.
2 x 175 W for tweeter & medium.
1 x 250 W for woofer.

A stereo integrated amplifier that combines a digital to audio converter, preamplifier and power amplifier into one high-end one box solution.

22 kHz measurement bandwidth (flat), true RMS unloaded: 100 dB.


IMD (SMPTE), unloaded: < 0.02 %.
THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6 dBFS.

Nominal line voltage: 115 V or 230 V.
Input voltage range: +/- 15 %.

The best active wireless subwoofer that works best paired with other active speakers in the Goldmund range. The Metis Wireless sub is an easy way to add depth to your speaker system.

The best in-class stereo amplifier that delivers 450W of power. This product can be paired with any high-end power preamplifier.

22 kHz measurement bandwidth (flat), true RMS unloaded: 118 dB.


IMD (SMPTE), unloaded: < 0.04 %.
THD+N, unloaded: < 0.04 % from 20 Hz to 20 kHz at 20 Vrms output.


Max level before clipping, Analog input: 1 Vrms.


Nominal line voltage: 115 V or 230 V (+/- 15 %).
Fuse: 8 A.

IMD (SMPTE), unloaded: < 0.05 %.
THD+N, unloaded: < 0.05 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6.6 dBFS.


A dedicated phono amplifier, the perfect accompaniment to a premium turntable.

< 0.007 % (20 Hz-20 kHz at 4 Vrms output).

– 0.03 dB / + 0.06 dB max derivation from RIAA curve.

Lyngdorf

Lyngdorf TDAI-3400 is powerful and advanced digital amplifier.

2-channel integrated amplifier and audio processor

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz, THD-N 1w/8ohm 0,04% / THD-N 1w/4ohm 0,04%

RoomPerfect™, Pre-Equaliser, ICC, 32 x adjustable voicing holding ≤8 filters with adjustable gain and Q

The MP-40 2.1 multichannel processor from Lyngdorf Audio offers the same sonic qualities and performance of the flagship processor, the MP-60 2.1, in a streamlined design for smaller immersive or surround sound home cinemas where less decoding channels are required.The MP-40 2.1 features 12 native channel decoding and 16 balanced audio outputs and offers full support of the immersive surround formats DOLBY ATMOS®, DTS:X® and AURO-3D® as well as 8K and 3D video, HDCP 2.3, and advanced HDMI switching. Ease of installation and user-friendly features are complemented with a simplified feature allowing the chance for one to experience the performance that Lyngdorf Audio is famous for without all the bells and whistles

12 decoding/upmixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs


Dolby Surround, AURO-MATIC®, DTS Neural:X


3 x HDMI (1 x HDMI eARC) ≤192kHz/24bit, 1 x AES/EBU S/P-DIF input (≤192kHz/24bit), 3 x S/P-DIF coaxial inputs (≤192kHz/24bit), 4 x S/P-DIF optical inputs (≤96Hz/24bit), 1 x USB audio input (≤192kHz/32bit), 1 x microphone input (XLR) for RoomPerfect


16 x XLR analog outputs (16 Vrms), 1 x SPDIF coax digital ZONE output (Fix 96kHz/24bit)

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicings holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q


Internet radio (vTuner, airable), AirPlay 2, Spotify Connect, Tidal Connect with Dolby Atmos Music, Roon Ready, DLNA Support of FAT32 based media storage (uPnP/

3 x HDMI 2.1 (HDCP 2.3), accepts 8k30 RGB/YCbCr 4:4:4 10-bit video, 8k60 YCbCr 4:2:0 10-bit high definition video, 4k120 4:4:4 10-bit high frame rate video, variable refresh rate (VRR), fast vactive (FVA), and auto low latency mode (ALLM) support, accepts HDR, Dolby Vision™ and HLG


1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)


RoomPerfect™ microphone, Microphone stand, Microphone cable, RF remote control

The Lyngdorf CD-2 is a pure audio CD player.

1 x Coaxial Digital (galvanic isolated), 1 x Optical Digital, 1 x Analog Single Ended RCA, 1 x Analog Balanced XLR

20 – 20k Hz, +/- 0.02dB THD + N: 0.0018%

The SDA-2400 is a versatile digital stereo power amplifier features both analog and digital inputs.

1 x Analog Single Ended RCA, 1 x Analog Balanced XLR, 1 x Coaxial Digital (≤192kHz / 24 bit), 1 x Optical Digital (≤96kHz / 24 bit), * All inputs has signal detection

A convenient wireless hub that connects all the sources – TV, computer, players and audio servers.

In1 RCA S/PDIF.
In2 Toslink optical.
In3 USB Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).Any inputs from 1 to 3 can receive stereo audio encoded signal up to 384 kHz/Bit depth up to 32 compatible DSD over PCM.

4 parallel Digital RCA S/PDIF 2-channel outputs.
1 Wireless outputs 4 channels max.
1 monitor headphone output (on front panel).

Nominal line voltage: 115V or 230 V (switchable).
Input voltage range: +/- 15 %.
Rated power consumption: 11 W.
1,6 A delayed fuse.
ON/OFF power switch key.
Main voltage selector.

22 kHz measurement bandwidth (flat): > 100 dB.

THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output.
IMD (SMPTE), unloaded: < 0.02 % before clipping.

USB device:
– Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).
– Sample rate up to 384 kHz/Bit depth up to 32.
– DSD over PCM capabilities.

1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms.
1 x Analog RCA (Left & Right).

Nominal line voltage: 117 or 234 V (switchable).
Fuse 8A for 110V and 220V.
Input voltage range: +/- 10 %.

IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit).

Telos 7 NextGen

An integrated stereo amplifier, the smaller sibling of the Telos 590 NextGen. An all in one solution with a select range of digital and analogue sources.