Goldmund

A convenient wireless hub that connects all the sources – TV, computer, players and audio servers.

A premium wireless active loudspeaker. The Samadhi 3-way speaker has 3 built-in Telos amplifiers and 4 drivers, totaling 700W per unit. Of the three in the wireless range the Samadhi is the largest.

Built-in 700 W Telos amplifier per unit.
2 x 200 W for tweeter & medium.
1 x 300 W for woofer.

1 x digital S/PDIF input.
1 x wireless audio input.

A premium wireless active loudspeaker featuring an integrated powerful 650W Telos amplifier. Of the three in the wireless range the Satya is the mid-size loudspeaker.

Built-in 650 W Telos amplifier per unit.
2 x 175 W for tweeter & medium.
1 x 300 W for woofer.

A preamplifier with a wide range of purely analogue inputs. The 37S is a two-box system that includes a separate power supply. This product can be paired with any high-end power amplifier.

These values for any level to maximum output level.
+/- 0 dB, 20 – 20 kHz.
+/- 3 dB, 0.2 – 900 kHz.

With 1 Vrms output level, 80 KHz measurement bandwidth, 600 ohms termination impedance.
THD unbalanced input to unbalanced output: 0.002 % flat with frequency.
THD balanced input to balanced out: 0.001 % flat with frequency.
IMD unbalanced input to unbalanced output: 0.002 %.
IMD balanced input to balanced out: 0.001 %.


Input impedance: 39 kOhms.
Maximum input level (balanced): 9.6 Vrms.
Maximum input level (unbalanced): 4.8 Vrms.

Nominal line voltage: 115 or 230 V.
Input voltage range: +/-15 %.
Maximum power consumption: 70 W.

The baby of the z-frame wireless range the Prana is a premium wireless active loudspeaker featuring an integrated powerful 600W Telos amplifier.

Built-in 600 W Telos amplifier per side.
2 x 175 W for tweeter & medium.
1 x 250 W for woofer.

A stereo integrated amplifier that combines a digital to audio converter, preamplifier and power amplifier into one high-end one box solution.

22 kHz measurement bandwidth (flat), true RMS unloaded: 100 dB.


IMD (SMPTE), unloaded: < 0.02 %.
THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6 dBFS.

Nominal line voltage: 115 V or 230 V.
Input voltage range: +/- 15 %.

The best active wireless subwoofer that works best paired with other active speakers in the Goldmund range. The Metis Wireless sub is an easy way to add depth to your speaker system.

An integrated stereo amplifier, the smaller sibling of the Telos 590 NextGen. An all in one solution with a select range of digital and analogue sources.

22 kHz measurement bandwidth (flat): > 100 dB.

THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output.
IMD (SMPTE), unloaded: < 0.02 % before clipping.

USB device:
– Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).
– Sample rate up to 384 kHz/Bit depth up to 32.
– DSD over PCM capabilities.

1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms.
1 x Analog RCA (Left & Right).

Nominal line voltage: 117 or 234 V (switchable).
Fuse 8A for 110V and 220V.
Input voltage range: +/- 10 %.

IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit).

The best in-class stereo amplifier that delivers 450W of power. This product can be paired with any high-end power preamplifier.

22 kHz measurement bandwidth (flat), true RMS unloaded: 118 dB.


IMD (SMPTE), unloaded: < 0.04 %.
THD+N, unloaded: < 0.04 % from 20 Hz to 20 kHz at 20 Vrms output.


Max level before clipping, Analog input: 1 Vrms.


Nominal line voltage: 115 V or 230 V (+/- 15 %).
Fuse: 8 A.

Lyngdorf

The MP-40 surround sound processor from Lyngdorf Audio offers all the sonic qualities and performance of the flagship processor, the MP-60, in a streamlined design for smaller applications.

12 decoding/up mixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)

The MP-60 2.1 is an AV amplifier equipped with all the advanced technologies for which Lyngdorf Audio is known, including the renowned room correction system RoomPerfect and the unsurpassed quality in digital signal processing.

16 decoding/up mixing channels, Dolby Atmos®, DTS:X Pro (14 channels), AURO-3D® (14 channels), all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz

RoomPerfect, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

The TDAI-1120 is a small integrated amplifier with room correction and streaming.

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz THD-N 1w/8ohm 0,04%, THD-N 1w/4ohm 0,04%

RoomPerfect™, Pre-Equaliser, ICC, 32 x adjustable voicing holding ≤8 filters with adjustable gain and Q

2 x 120 W RMS @ 4Ohm / 2 x 60 W RMS @ 8Ohm

Mark Levinson

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs.

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path

Discrete, balanced R-2R ladder volume control for precision and performance

Class-A Pure Phono stage with custom configuration for MC and MM cartridge compatibility

Integrated Main Drive fully balanced class-A headphone preamplifier circuitry

Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Balanced, single-ended and headphone outputs

The Mark Levinson No 5206 is Dual-Monoaural Pre-amplifier.

Pure Path class-A analog signal with two awarded patents

32 Bit/384 kHz Precision Link II DAC with 4x DSD Capability

Class-A high pass subwoofer filterPremium hybrid topography phono stage

Selectable capacitive and resistive load settings

Bluetooth audio input including aptX HD support

Balanced XLR and single-ended RCA outputs

This 3-in-1 audio player combines a Super Audio CD player, high-resolution network streaming capability and Precision Link II Digital-to-Analog Converter (DAC).

3-in-1 companion source for Nº 5805 or Nº 5802

The Mark Levinson® № 526 is a 12-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage, 32-bit Precision Link DAC, and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs for enthusiasts of all music formats.

Class-A Pure Phono stage with physically separated channels for MC and MM

32-bit Precision Link DAC with three selectable filters and seven power supplies

Class-A Main Drive headphone output for up to 32-ohm headphones using main circuit

Supports high-resolution PCM (up to 32-bit, 192 kHz) and DSD (up to 5.6 MHz)

Balanced, single-ended, and headphone outputs

The Mark Levinson® № 519 Audio Player combines wireless and wired streaming from networked libraries and streaming services, CD player, and connections for USB drives, digital audio inputs, and Bluetooth® with aptX®.

Digital Inputs: 1 balanced (XLR); 2 coaxial (RCA); 2 optical (Toslink); 1 USB-B asynchronous

Class-A Main Drive Headphone output uses main line stage to directly drive headphones down to 32 ohms

Selectable fixed or variable line outputs for use with an analog preamp or for direct connection to amplifiers or active loudspeakers

Analog Outputs: 1 balanced (XLR); 1 pair single-ended (RCA), 1 headphone (¼", 6.3mm TS)

Digital Outputs: 1 balanced (XLR); 1 single-ended (RCA), 1 optical (Toslink)

In1 RCA S/PDIF.
In2 Toslink optical.
In3 USB Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).Any inputs from 1 to 3 can receive stereo audio encoded signal up to 384 kHz/Bit depth up to 32 compatible DSD over PCM.

4 parallel Digital RCA S/PDIF 2-channel outputs.
1 Wireless outputs 4 channels max.
1 monitor headphone output (on front panel).

Nominal line voltage: 115V or 230 V (switchable).
Input voltage range: +/- 15 %.
Rated power consumption: 11 W.
1,6 A delayed fuse.
ON/OFF power switch key.
Main voltage selector.

Mimesis 11

A convenient wireless hub that connects all the sources – TV, computer, players and audio servers.