Goldmund

The Telos 2800 Mono Power Amplifier combines outstanding performance with aesthetic appeal, reminiscent of a finely crafted jewelry box. It comes in Goldmund’s classic silver-grey finish, lending a sophisticated flair to any audio setup. To cater to individual tastes, customers have the choice to customize the top left front ring of their Telos 2800 in either gold* or silver grey, ensuring it complements any decor seamlessly.

A premium wireless active loudspeaker. The Samadhi 3-way speaker has 3 built-in Telos amplifiers and 4 drivers, totaling 700W per unit. Of the three in the wireless range the Samadhi is the largest.

Built-in 700 W Telos amplifier per unit.
2 x 200 W for tweeter & medium.
1 x 300 W for woofer.

1 x digital S/PDIF input.
1 x wireless audio input.

A premium wireless active loudspeaker featuring an integrated powerful 650W Telos amplifier. Of the three in the wireless range the Satya is the mid-size loudspeaker.

Built-in 650 W Telos amplifier per unit.
2 x 175 W for tweeter & medium.
1 x 300 W for woofer.

A preamplifier with a wide range of purely analogue inputs. The 37S is a two-box system that includes a separate power supply. This product can be paired with any high-end power amplifier.

These values for any level to maximum output level.
+/- 0 dB, 20 – 20 kHz.
+/- 3 dB, 0.2 – 900 kHz.

With 1 Vrms output level, 80 KHz measurement bandwidth, 600 ohms termination impedance.
THD unbalanced input to unbalanced output: 0.002 % flat with frequency.
THD balanced input to balanced out: 0.001 % flat with frequency.
IMD unbalanced input to unbalanced output: 0.002 %.
IMD balanced input to balanced out: 0.001 %.


Input impedance: 39 kOhms.
Maximum input level (balanced): 9.6 Vrms.
Maximum input level (unbalanced): 4.8 Vrms.

Nominal line voltage: 115 or 230 V.
Input voltage range: +/-15 %.
Maximum power consumption: 70 W.

The baby of the z-frame wireless range the Prana is a premium wireless active loudspeaker featuring an integrated powerful 600W Telos amplifier.

Built-in 600 W Telos amplifier per side.
2 x 175 W for tweeter & medium.
1 x 250 W for woofer.

A stereo integrated amplifier that combines a digital to audio converter, preamplifier and power amplifier into one high-end one box solution.

22 kHz measurement bandwidth (flat), true RMS unloaded: 100 dB.


IMD (SMPTE), unloaded: < 0.02 %.
THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6 dBFS.

Nominal line voltage: 115 V or 230 V.
Input voltage range: +/- 15 %.

The best active wireless subwoofer that works best paired with other active speakers in the Goldmund range. The Metis Wireless sub is an easy way to add depth to your speaker system.

A convenient wireless hub that connects all the sources – TV, computer, players and audio servers.

In1 RCA S/PDIF.
In2 Toslink optical.
In3 USB Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).Any inputs from 1 to 3 can receive stereo audio encoded signal up to 384 kHz/Bit depth up to 32 compatible DSD over PCM.

4 parallel Digital RCA S/PDIF 2-channel outputs.
1 Wireless outputs 4 channels max.
1 monitor headphone output (on front panel).

Nominal line voltage: 115V or 230 V (switchable).
Input voltage range: +/- 15 %.
Rated power consumption: 11 W.
1,6 A delayed fuse.
ON/OFF power switch key.
Main voltage selector.

An integrated stereo amplifier, the smaller sibling of the Telos 590 NextGen. An all in one solution with a select range of digital and analogue sources.

22 kHz measurement bandwidth (flat): > 100 dB.

THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output.
IMD (SMPTE), unloaded: < 0.02 % before clipping.

USB device:
– Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).
– Sample rate up to 384 kHz/Bit depth up to 32.
– DSD over PCM capabilities.

1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms.
1 x Analog RCA (Left & Right).

Nominal line voltage: 117 or 234 V (switchable).
Fuse 8A for 110V and 220V.
Input voltage range: +/- 10 %.

IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit).

Elevating the auditory experience to new heights, we proudly unveil the Mimesis Signature, a convergence of analogue finesse and digital prowess. This symphony of audio excellence introduces a paradigm shift in preamplification technology.

2 x Digital S/PDIF, 1 x Toslink Optical, 1 x USB AUDIO (up to 384 kHz PCM up to DSD512)

ON/OFF power switch, key Voltage input selector, RS232 Command connector

Frequency response (These values for any level to maximum output level)

+/- 0.1 dB, 10 Hz – 20 kHz, +/- 1.5 dB, 10 Hz – 100 kHz, +/- 3 dB, 10 Hz – 200 kHz

Distortion with 1 V RMS output level, 80 KHz measurement bandwidth, 600 Ohms termination impedance

THD unbalanced in to unbalanced out < 0.005% (-90 dB) flat with frequency

IMD unbalanced in to unbalanced out < 0.002% (-80 dB)

117 or 234 V (switchable) Fuse 2.5A for 110V Fuse 1A for 220V Input voltage range: +/- 10 %

Lyngdorf

The MXA-8400 is the most powerful product from Lyngdorf Audio ever, delivering 8 x 400 watts of ultra-linear and stable power. It incorporates Purifi EIGENTAKT technology with the innovative EIGENTAKT ErrorCorrection (EEC), Lyngdorf Audio’s highly efficient and advanced power supply PowerPerfect, ultra-low-noise and precise analog input stages, and a 4-layer main PCB optimized for the best signal purity and grounding. With this range of features, the MXA-8400 sets new amplifier benchmarks in audio quality, measured performance, and reliability.

8 x 400 W @4Ω (2-CHANNEL mode), 8 x 200 W @8Ω (2-CHANNEL mode), 4 x 800 W @8Ω (BRIDGE mode)


8 x 340 W @4Ω (2-CHANNEL mode), 8 x 200 W @8Ω (2-CHANNEL mode)


15 minutes (at no input signal, in LOW POWER mode)

0.001% @200 W, 8Ω / 340 W, 4Ω, 20Hz-20kHz, 0.0006% @10 W, 4Ω, 20Hz-20kHz, LOW Sensitivity mode, 0.0007% @10 W, 4Ω, 20Hz-20kHz, HIGH Sensitivity mode


 58V peak (2-CHANNEL mode), 116V peak (BRIDGE mode))
Gain: HIGH Sensitivity mode: 26.1 dB (2-CHANNEL mode), 31.7 dB (BRIDGE mode)

16.6 dB (2-CHANNEL mode) 22.2 dB (BRIDGE mode)

128dB (A-weighted ref. rated power, LOW Sensitivity mode)

HIGH Sensitivity mode2V, LOW Sensitivity mode 6V


The MP-40 2.1 multichannel processor from Lyngdorf Audio offers the same sonic qualities and performance of the flagship processor, the MP-60 2.1, in a streamlined design for smaller immersive or surround sound home cinemas where less decoding channels are required.The MP-40 2.1 features 12 native channel decoding and 16 balanced audio outputs and offers full support of the immersive surround formats DOLBY ATMOS®, DTS:X® and AURO-3D® as well as 8K and 3D video, HDCP 2.3, and advanced HDMI switching. Ease of installation and user-friendly features are complemented with a simplified feature allowing the chance for one to experience the performance that Lyngdorf Audio is famous for without all the bells and whistles

12 decoding/upmixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs


Dolby Surround, AURO-MATIC®, DTS Neural:X


3 x HDMI (1 x HDMI eARC) ≤192kHz/24bit, 1 x AES/EBU S/P-DIF input (≤192kHz/24bit), 3 x S/P-DIF coaxial inputs (≤192kHz/24bit), 4 x S/P-DIF optical inputs (≤96Hz/24bit), 1 x USB audio input (≤192kHz/32bit), 1 x microphone input (XLR) for RoomPerfect


16 x XLR analog outputs (16 Vrms), 1 x SPDIF coax digital ZONE output (Fix 96kHz/24bit)

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicings holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q


Internet radio (vTuner, airable), AirPlay 2, Spotify Connect, Tidal Connect with Dolby Atmos Music, Roon Ready, DLNA Support of FAT32 based media storage (uPnP/

3 x HDMI 2.1 (HDCP 2.3), accepts 8k30 RGB/YCbCr 4:4:4 10-bit video, 8k60 YCbCr 4:2:0 10-bit high definition video, 4k120 4:4:4 10-bit high frame rate video, variable refresh rate (VRR), fast vactive (FVA), and auto low latency mode (ALLM) support, accepts HDR, Dolby Vision™ and HLG


1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)


RoomPerfect™ microphone, Microphone stand, Microphone cable, RF remote control

McIntosh

With the MQ112, you can make changes to the music itself so that room acoustic problems can be overcome. The results can be stunning and can make even a great sounding stereo system sound even better.

±12dB at 25Hz, 50Hz, 100Hz, 200Hz, 400Hz, 1kHz, 3kHz, and 10kHz

The McIntosh MHT300 Home Theater Receiver (or AV Receiver or AVR) is an uncompromising 7.2 (or 5.2.2) channel home theater powerhouse sure to heighten your emotional connection to what you are watching. With support for breathtaking 8K/60Hz and 4K/120Hz video and leading home theater surround sound audio formats Dolby® Atmos and DTS:X™, plus delivering 120 – 150 Watts of legendary McIntosh power to your home theater speakers, the MHT300 will make your home theater dreams come true.

150 Watts per channel into 4 Ohms/120 Watts per channel into 8 Ohms (ALL 7 channels driven)

4 HDMI inputs & 1 HDMI output: 8K/60Hz & 4K/120Hz; HDCP 2.3; 40Gbps; Rec. ...

Naim

The NAC 332 preamplifier is the digitally controlled, pure analogue centre of your system. Each and every audio stage is meticulously designed using discrete transistors, building on 50 years of experience in manufacturing high-performance audio systems. It features a precision fixed resistor volume control and a class-A headphone amplifier, with XLR and RCA outputs.

Bi-directional ZigBee remote and front panel.
Inter-product communications with NSS 333 via ZigBee
Optical 3.5mm output for synchronised control of compatible products
e.g. NAP 250/350

1 x 8-pin DIN (47kΩ, 2.2V typical, 9.5Vrms Max)

2 x 5-pin DIN (47kΩ, 2.2V typical, 9.5Vrms Max)

3 x RCA pair (47kΩ, 2.2V typical, 9.5Vrms Max)

2 x XLR balanced pair (100kΩ, 2.2V typical, 9.5V max)

8-pin DIN has +/-18V (for compatible external phono stages e.g. NVC TT)

Line: 0.003% @2.2V input volume at 0dB, 1kHz

(Line: 0.018% @2.2V input volume at 0dB, 20kHz

1 x 6.35mm headphone jack (1.5W into 16Ω)

Line: 0.003% @2.2V input volume at 0dB, 1kHz
(Line: 0.018% @2.2V input volume at 0dB, 20kHz)

Line: 90dB at 1kHz, volume at 0dB
(Line: 70dB at 20kHz, volume at 0dB)

Typical use consumption: 20W
Network stanby mode consumption: <2W
Standby mode consumption: <0.5W


ur highly dynamic monoblock power amplifier

A benchmark amplifier; a pair of NAP 350s offer precise musical performance. Designed to effortlessly drive large and demanding loudspeakers, capturing the true dynamics of music.

Signal to noise ratio ref 100W 8 A-weighted

Signal to noise ratio ref 1W 8 A-weighted

1 x 34kΩ singled ended via legacy adaptor lead

Chord Electronics

BerTTi is a fully balanced 75-watt stereo power amplifier benefitting from the latest dual-feed-forward error-correction topology. First unveiled at HIGH END, Munich, 2023, BerTTi directly replaces its predecessor, the TToby. It also expands the British built ULTIMA-topology range amplifiers designed by Chord Electronics owner and founder John Franks. Franks’ advanced ULTIMA error-correction technology monitors and immediately corrects signals before the output stage for astonishing accuracy.

< 0.05 % THD+N, < 0.05 % from 20 Hz to 20 kHz at 30 Vrms output

Output Noise Floor Analog input terminated with RCA Shorting Caps

35 dB, +/- 9 dB (adjustable in 3 dB increments)

Analogue input: 1 Vrms Digital input: -6 dBFS

22 kHz measurement bandwidth (flat), true RMS unloaded: 117 dB

1 x Main fuse (4 A slow-blow for 230 V) ; (8 A slow-blow for 115 V)

1 x Green-yellow AC earth binding post (with bridge connection)

1 x Ground lift switch 2 x output binding posts (red & black)

1 x output Goldmund speaker 4B type connector

1 x Analogue RCA input (unbalanced connector)

1 x Analogue XLR input (balanced connector)

1 x Digital input and output RCA connectors

IEC 60065: 1/8 Output Power at 8 Ω: 365 W

44 W x 32 H x 46 D (cm) 17.3 W x 12.6 H x 18.1 D (inch), 59 kg

Telos-2800