Arcam

The ARCAM ST5 is the high resolution upgrade for the Radia integrated amplifiers. The slim form factor includes a control link to these amplifiers, allowing the 2 components to act as one from your device. Sonically, this combination off ers better sound quality due to the
benefits of isolated components with individual power supplies.

The ARCAM A25 is the best sounding, and most feature rich of the Radia Integrated amplifiers. The visual luxurious highlights hint towards the more luxurious musical experience that it offers.

This is achieved with a 5th generation Class G amplifier design. You can expect the best sound quality and dynamics from what has always been a better sounding, and more efficient Class of amplifier. New components and materials have been painstakingly analysed and reviewed to ensure uncompromising sound performance.

2 channels driven, 20Hz - 20kHz, 8Ω 100W

Harmonic distortion, 80% power, 8Ω at 1kHz 0.002%

Signal/noise ratio (A-wtd, ref. 50W, 1V input) 106dB

Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB

USB-C 384, 352.8, 192, 176.4, 96, 88.2, 48, 44.1

Coaxial (RCA) 192, 176.4, 96, 88.2, 48, 44.1

Optical (Toslink) 192, 176.4, 96, 88.2, 48, 44.1

Supported DSD USB-C only 1024, 512, 256, 128, 64

Frequency response (fi lter 1) 20Hz—20kHz ± 0.2dB

Signal/noise ratio (A-wtd, ref. 50W, 0dBFS) 110dB

Maximum output level (RMS) into 32Ω/300Ω 2.5V/5V

Mains voltage 100V or 110–120V or 220–240V, 50–60Hz

The Solo Uno brings total simplicity to the complex world of audio streaming by providing a compact, stylish and elegant streamer with a built-in amplifier.

Class leading super-efficient amplifier design

A simple system that only requires two speakers, the Solo Uno and an app

Google Cast, AirPlay 2, Roon Ready, UPnP Streamer

The Solo Uno features a full MQA decoder, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording in the highest possible sound quality. At this level of playback you are hearing what was created in the studio – with precise file and platform-specific DAC compensation and management.

Optimised for low noise and minimum distortion

Power requirements: 100 – 240VAC, 50/60Hz

The AVR10 is a high-performance audio/visual receiver that delivers stunning realism for the ultimate home cinema experience. With an impressive 12-channel surround solution and featuring all the latest CODECs from Dolby, DTS, Auro-3D and IMAX Enhanced, the AVR10 exemplifies sound quality and engineering excellence.

Dolby Atmos , IMAX Enhanced, Auro-3D & DTS:X 7.1.4 decoding

7 HDMI inputs, 2 HDMI outputs, eARC compatible

Google Cast/UPnP capability for streaming audio

Free MusicLife iOS and Android UPnP and control app

Mains voltage: 110–120V or 220–240V, 50–60Hz 

Power consumption (maximum): 1.5kW (Thermal dissipation approx. 5200 BTU/hour) 

Power consumption (idle, typical): 90W (Thermal dissipation approx. 340 BTU/hour)

SA30 is a Class G Intelligent Integrated Amplifier designed with all the latest cutting-edge features - Class G is expertly implemented and, the highest resolution of audio support is presented. Simple streaming is available with a mobile device using the native app of choice via Apple AirPlay2 or Google Chromecast.


Class G amplification for impeccable sound and efficiency

120W of power per channel into 8Ω, 220W into 4Ω

5 analogue inputs including switchable MM/MC PHONO input

The SA30 features a full MQA decoder, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording in the highest possible sound quality. At this level of playback you are hearing what was created in the studio – with precise file and platform-specific DAC compensation and management.

Full I/P control including Control4 and Crestron

Total harmonic distortion + noise = 0.002%

Mains voltage: 110–120V or 220–240V, 50/60Hz 

The ARCAM A5 is for those intimate listening experiences with your favourite music.

Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%

Signal/noise ratio (A-wtd, ref. 50W, 0dBFS) 109dB

Extremely efficient class A/B amplification

Total harmonic distortion + noise = 0.003%

Mains voltage: 110–120V or 220–240V, 50–60Hz

The ARCAM CD5 is for those intimate listening experiences with your favourite music on Compact Disc.

ARCAM has been a pioneer of Compact Disc playback since the development and introduction of the Delta 70 CD player in 1986, our own ground up design. The experience of producing
high quality digital audio products since then has been poured into the ARCAM CD5. Hi-res audio playback capability is included for FLAC and WAV encoded CD and USB files.

Supported media: CD (Audio), CD-R (Audio / Data), CD-RW (Audio / Data), USB-A (Data) Supported fi les (Data): WAV (LPCM), FLAC, MP3, AAC, WMA
Supported Bit depth:16 bit – 24 bit
Supported sample rates (kHz): 32, 44.1, 48, 88.2 (WAV & FLAC only), 96 (WAV & FLAC only) Outputs: 1x Analgue Stereo (RCA) pair, 1x Digital Coaxial (RCA), 1x Digital Optical (Toslink) Frequency Response (fi lter 1): 20Hz - 20kHz ±0.05dB

Max Analogue Output (0dBFS): 2.1V rms
SNR (A-wtd, ref. 16-bit/24-bit, 0dBFS): 93dB/115dB
Mains Voltage & Power Consumption: AC 100-240V, 50/60 Hz, 12W
Supplied Accessories: Mains lead(s), Remote control with 2 x AAA batteries, Quick Start Guide, Important Safety Instructions


The ARCAM A15 is the power house, with 80 Watts of output per channel. It is perfect for listening with tower speakers, in larger rooms, and more exuberant listening volumes.

Maximum output level (RMS) into 32Ω/300Ω 2.5V/5Vrms

Chord Electronics

Poly is a portable music streamer/player that combines with Mojo to wirelessly stream from connected devices and playback from its Micro SD, all with smartphone control. It enables hi-fi sound quality at home or on-the-go, with Wi-Fi, Bluetooth, AirPlay and network connectivity and upgrades headphone, car and home audio performance.

Rechargeable LiPo 2200mAh9-hour + playtime and fast-charging via USB

Support for all major file types including

ACC, WAV, FLAC, AIFF, OGG VORBIS, ALAC, WMA and MP3

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 358.8kHz, 384kHz,717.6kHz and 768kHz; DSD via DoP sample rates: DSD64 – DSD256 (Quad-DSD); DSD from SD card

iPhone, iPad, Android phones/tablets, Windows and Mac OS X computers and DAPs

Poly can create its own hotspot where networks/devices/countries don’t support tethering

allows configuration of connected networks (up to 32)

The 2go streamer/server transforms the abilities of the Hugo 2, adding both Ethernet and wireless streaming, plus 4 TB of microSD card storage to the DAC/pre/headphone amp

In order for 2go to perform as a fully functional streamer, a connection with Hugo 2 (DAC/Preamp/Headphone amp) or 2yu is required.

Internal battery with up-to 10 hrs (approx) playback. Desktop mode activated upon insertion of Micro USB charging cable).

Connect to (allows 2go to connect to an existing 2.4GHz WiFi network) or Hotspot mode (activated within the Gofigure app, which allows 2go to broadcast its own WiFi network with SSID and password in the eventuality that the device cannot connect to a static network).

44.1kHz – 768kHZ (16bit – 32bit) | DSD 64 to DSD 256 (via DoP)

ACC, WAV, FLAC, AIFF, OGG VORBIS, ALAC, WMA, MP3 

Initial setup, configuration, and updates

Via free Gofigure app available on iOS and Google Play store

2x Onboard Micro SD card slots (up-to 4TB of total storage)

Roon endpoint, DLNA (server and render), AirPlay, Bluetooth audio (A2DP), Tidal, Qobuz, Internet radio

The 2yu is a digital interface that connects with 2go to create a network bridge for use with a DAC, DAC-equipped device or the Hugo M Scaler.

In order for 2yu to inherit streaming/music transport capabilities or function as an audio interface, a connection with 2go is required.

Micro USB (5v 1amp minimum required) – through 2go

44.1kHz – 768kHZ | DSD 64 to DSD 256 (Dependant on output)

Integrated, automatic downsampling is provided if a higher sample rate is being played than the output can support.

USB Type-A (44.1kHz – 768kHz / DSD 256)

Goldmund

A convenient wireless hub that connects all the sources – TV, computer, players and audio servers.

In1 RCA S/PDIF.
In2 Toslink optical.
In3 USB Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).Any inputs from 1 to 3 can receive stereo audio encoded signal up to 384 kHz/Bit depth up to 32 compatible DSD over PCM.

4 parallel Digital RCA S/PDIF 2-channel outputs.
1 Wireless outputs 4 channels max.
1 monitor headphone output (on front panel).

Nominal line voltage: 115V or 230 V (switchable).
Input voltage range: +/- 15 %.
Rated power consumption: 11 W.
1,6 A delayed fuse.
ON/OFF power switch key.
Main voltage selector.

Lyngdorf

The MP-40 surround sound processor from Lyngdorf Audio offers all the sonic qualities and performance of the flagship processor, the MP-60, in a streamlined design for smaller applications.

12 decoding/up mixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)

The MP-60 2.1 is an AV amplifier equipped with all the advanced technologies for which Lyngdorf Audio is known, including the renowned room correction system RoomPerfect and the unsurpassed quality in digital signal processing.

16 decoding/up mixing channels, Dolby Atmos®, DTS:X Pro (14 channels), AURO-3D® (14 channels), all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz

RoomPerfect, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

The TDAI-1120 is a small integrated amplifier with room correction and streaming.

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz THD-N 1w/8ohm 0,04%, THD-N 1w/4ohm 0,04%

RoomPerfect™, Pre-Equaliser, ICC, 32 x adjustable voicing holding ≤8 filters with adjustable gain and Q

2 x 120 W RMS @ 4Ohm / 2 x 60 W RMS @ 8Ohm

Mark Levinson

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs.

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path

Discrete, balanced R-2R ladder volume control for precision and performance

Class-A Pure Phono stage with custom configuration for MC and MM cartridge compatibility

Integrated Main Drive fully balanced class-A headphone preamplifier circuitry

Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Balanced, single-ended and headphone outputs

Bowers & Wilkins

The most compact headed model brings all the technical advantages of a dedicated midrange enclosure – the Turbine™ Head, with its decoupled midrange cone – to a smaller footprint that’s easily accommodated in any home.

Diamond tweeter
Solid body Tweeter-on-Top
Continuum™ cone FST
Anti-Resonance plug
Biomimetic Suspension
Turbine™ Head
Matrix™
Aerofoil™ cone bass units
Flowport

50W – 500W into 8Ω on unclipped programme

A versatile integrated amplifier that combines the best of analogue and digital with it's built in digital to analogue connection. As well as the three digital inputs and phono stage, the SA20 is also equipped with three analogue RCA inputs and a front-mounted 3.5mm AUX input.

Supported Hi-res media: FLAC, WAS (LPCM), MQA, AAC, ALAC, AIFF, DSD (128) Supported Hi-res Bit depth: 16, 24
Supported samples rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192
Supported media: MP3, MP4, OGG, WMA
Supported Bit depth: 16
Supported samples rates (kHz): 44.1, 48
Gapless Playback: Yes
Digital Outputs: 1x Coaxial (RCA), 1x Optical (Toslink)
Analogue Outputs: 1x Stereo (RCA) pair
Frequency response (fi lter 1): 20Hz—20kHz ± 0.05dB
Mains voltage: 100V or 110–120V or 220–240V, 50–60Hz
Power consumption: 12W
Power consumption (Eco standby): <0.5W