Arcam

A power amplifier with seven channels, each delivering 140W of power.

The ARCAM A25 is the best sounding, and most feature rich of the Radia Integrated amplifiers. The visual luxurious highlights hint towards the more luxurious musical experience that it offers.

This is achieved with a 5th generation Class G amplifier design. You can expect the best sound quality and dynamics from what has always been a better sounding, and more efficient Class of amplifier. New components and materials have been painstakingly analysed and reviewed to ensure uncompromising sound performance.

2 channels driven, 20Hz - 20kHz, 8Ω 100W

Harmonic distortion, 80% power, 8Ω at 1kHz 0.002%

Signal/noise ratio (A-wtd, ref. 50W, 1V input) 106dB

Frequency response (ref. RIAA curve) 20Hz—20kHz ± 1dB

USB-C 384, 352.8, 192, 176.4, 96, 88.2, 48, 44.1

Coaxial (RCA) 192, 176.4, 96, 88.2, 48, 44.1

Optical (Toslink) 192, 176.4, 96, 88.2, 48, 44.1

Supported DSD USB-C only 1024, 512, 256, 128, 64

Frequency response (fi lter 1) 20Hz—20kHz ± 0.2dB

Signal/noise ratio (A-wtd, ref. 50W, 0dBFS) 110dB

Maximum output level (RMS) into 32Ω/300Ω 2.5V/5V

Mains voltage 100V or 110–120V or 220–240V, 50–60Hz

The ARCAM A5 is for those intimate listening experiences with your favourite music.

Harmonic distortion, 80% power, 8Ω at 1kHz 0.003%

Signal/noise ratio (A-wtd, ref. 50W, 0dBFS) 109dB

Extremely efficient class A/B amplification

Total harmonic distortion + noise = 0.003%

Mains voltage: 110–120V or 220–240V, 50–60Hz

The PA410 is a high-performance power amplifier that delivers 4 channels of efficient Class AB amplification. With an impressive 70W per channel, the PA410 is designed to offer the greatest flexibility and power without compromising on control.

4 x 50W Class AB amplification (8ohm, 20Hz-20kHz, 0.2% THD)

Continuous power output at 0.2% THD per channel

Four channels driven, 4Ω / 8Ω, 20Hz – 20kHz - 70W / 50W

Two channels driven, 4Ω / 8Ω, 20Hz – 20kHz - 90W / 60W

Harmonic distortion, 80% power, 8Ω at 1kHz - 0.003%

Power consumption (idle, typical): 90W (Thermal dissipation approx. 340 BTU/hour)

The ARCAM CD5 is for those intimate listening experiences with your favourite music on Compact Disc.

ARCAM has been a pioneer of Compact Disc playback since the development and introduction of the Delta 70 CD player in 1986, our own ground up design. The experience of producing
high quality digital audio products since then has been poured into the ARCAM CD5. Hi-res audio playback capability is included for FLAC and WAV encoded CD and USB files.

Supported media: CD (Audio), CD-R (Audio / Data), CD-RW (Audio / Data), USB-A (Data) Supported fi les (Data): WAV (LPCM), FLAC, MP3, AAC, WMA
Supported Bit depth:16 bit – 24 bit
Supported sample rates (kHz): 32, 44.1, 48, 88.2 (WAV & FLAC only), 96 (WAV & FLAC only) Outputs: 1x Analgue Stereo (RCA) pair, 1x Digital Coaxial (RCA), 1x Digital Optical (Toslink) Frequency Response (fi lter 1): 20Hz - 20kHz ±0.05dB

Max Analogue Output (0dBFS): 2.1V rms
SNR (A-wtd, ref. 16-bit/24-bit, 0dBFS): 93dB/115dB
Mains Voltage & Power Consumption: AC 100-240V, 50/60 Hz, 12W
Supplied Accessories: Mains lead(s), Remote control with 2 x AAA batteries, Quick Start Guide, Important Safety Instructions


The ARCAM A15 is the power house, with 80 Watts of output per channel. It is perfect for listening with tower speakers, in larger rooms, and more exuberant listening volumes.

Maximum output level (RMS) into 32Ω/300Ω 2.5V/5Vrms

The ARCAM ST5 is the high resolution upgrade for the Radia integrated amplifiers. The slim form factor includes a control link to these amplifiers, allowing the 2 components to act as one from your device. Sonically, this combination off ers better sound quality due to the
benefits of isolated components with individual power supplies.

Supported Hi-res media: FLAC, WAS (LPCM), MQA, AAC, ALAC, AIFF, DSD (128) Supported Hi-res Bit depth: 16, 24
Supported samples rates (kHz): 44.1, 48, 88.2, 96, 176.4, 192
Supported media: MP3, MP4, OGG, WMA
Supported Bit depth: 16
Supported samples rates (kHz): 44.1, 48
Gapless Playback: Yes
Digital Outputs: 1x Coaxial (RCA), 1x Optical (Toslink)
Analogue Outputs: 1x Stereo (RCA) pair
Frequency response (fi lter 1): 20Hz—20kHz ± 0.05dB
Mains voltage: 100V or 110–120V or 220–240V, 50–60Hz
Power consumption: 12W
Power consumption (Eco standby): <0.5W

Chord Electronics

Updated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.

with legs

-1dB @ 0.2Hz to 46kHz and -3dB 0.1Hz to 200kHz

Based on 30 years of amplifier-building expertise, Huei offers MM/MC compatibility and integrates turntables to amplifiers.

Benefitting from both Moving Magnet and Moving Coil functionality, Huei offers compatibility with a huge range of cartridges thanks to comprehensive gain and impedance-matching options; Huei’s high- and low-gain switching settings are easily accessible via front-panel controls, introducing welcome flexibility.

Moving coil: 100Ω – 3,700Ω, 12-step user selectable

Moving magnet: 21dB – 42dB, 8-step user selectable

Moving coil: 49dB – 68dB, 8-step user selectable

The TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.

100w RMS per channel @ 0.016% distortion into 4Ω

ULTIMA PRE 2 is built to complement stereo systems.

The UTLIMA PRE 3 is a low noise preamplifier. 

The UTLIMA PRE 3 is equipped with five analogue inputs (two balanced and three unbalanced) all of which benefit from individual buffering and are filtered against potential ingress from radio frequency interference.

Externally, the PRE 3 benefits from a central circular power sphere flanked by a new volume control and balance/AV bypass selector, both of which benefit from a new ergonomic knob design.

Additional features include an AV bypass, plus a 5 V charging USB Type-A port.

BerTTi is a fully balanced 75-watt stereo power amplifier benefitting from the latest dual-feed-forward error-correction topology. First unveiled at HIGH END, Munich, 2023, BerTTi directly replaces its predecessor, the TToby. It also expands the British built ULTIMA-topology range amplifiers designed by Chord Electronics owner and founder John Franks. Franks’ advanced ULTIMA error-correction technology monitors and immediately corrects signals before the output stage for astonishing accuracy.

Anni is a desktop integrated amplifier that introduces our next-generation ULTIMA technology to both headphones and compact loudspeakers.

Mojo 2 is an advanced DAC/headphone amplifier to power your favourite headphones. 

Coaxial, dual-data coax, optical, Micro-USB and USB-C

2.7 uV A wt., no measurable noise floor modulation

118 dB stereo separation 1 kHz 300 ohms 2.5 V

7 x 100W Class G amplification (8ohm, 20Hz-20kHz, 0.2% THD)

Class G amplification with 20W of Class A operation

Mains voltage: 110–120V or 220–240V, 50–60Hz 

PA720

A power amplifier with seven channels, each delivering 140W of power.