Naim

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

2 x optical TOSLink (up to 24bit/96kHz)
1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x coaxial BNC (up to 24bit/192kHz, DoP 64Fs)

Typical use: 25W (when using a single 555 PS)
Network standby mode: <2W
Deep sleep: <0.5W

Pair of Burndy interconnect cables (Analogue and digital), Metal Zigbee® remote (inc batteries), Hi-Line interconnect cable, BNC to RCA adapter, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guid

The Naim Uniti Atom Headphone Edition Is A Fantastic Sounding & Compact Headphone Amplifier With Streaming. High-Resolution Music Streaming Capabilities, Airplay & Bluetooth Connection.

Digital: 2x Optical S/PDIF up to 96kHz, Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
Analogue: 1 x Stereo RCA pair
USB: 2x USB 2.0 (Type A connector)
Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio, Qobuz

Balanced XLR Preamp output
RCA Preamp output

Document pack, cleaning cloth, remote, AAA batteries and power lead.

Power Consumption Typical use: 17W
Network Standby mode: No-network Standby mode: Auto Standby time User selectable: adjustable from off up to 2 hour

A power amplifier in a slim package. The amplifier a 70W power amplifier with five analogue inputs plus a phono stage to power everything from speakers, turntables and headphones.

MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges

Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V

Powered Accessory Sockets: +24V for Naim phono amplifier

Speaker Outputs: 70W per channel into 8 ohms (4mm sockets), 100W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Line Outputs Fixed (level): AV (DIN), Stream (DIN) 130mV, 600 ohms

Headphone Output: 1/4 inch (6.35mm) TRS Socket


NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

Made for the compact disk enthusiast, this CD player features simple playback and usability that you would expect from a classic CD player.

Mains Supply: 100V, 115V, 230V; 50 or 60Hz


NARCOM-4 Remote Control, Power-Line Lite mains cable (UK denominations only)

The Naim Mu-so 2nd Generation is Wireless Bluetooth Music System with Apple Airplay 2, Spotify Connect & TIDAL Compatibility.


Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio

Digital (S/PDIF): Optical S/PDIF up to 96khz


Typical use: 17W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W

Dual tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

The Uniti Core is the ultimate music manager, able to create bit-perfect copies of your favourite CDs and serve them and the rest of your digital music collection up to music players around your home.


Typical Use (no storage attached): 6.7W
Network Standby (no storage attached): <2W
Deep Sleep: <0.5W
Network Standby (with internal or USB HDD attached): > 15W*.


*Actual power consumption will vary depending on the size and type of attached internal HDD or USB devices

Note: Power consumption will be increased with the addition of user fitted storage (typical increase of approximately 8W for an internal HDD, dependant on the specification of storage).


Power-Line Lite mains cable (UK only), standard mains cable (international markets), cleaning cloth, drive caddy screws, BNC to Phono Connector and quick start guide.


Please note: not sold with an internal hard drive - features a removable caddy into which an HDD or SSD can be installed

The Naim Uniti Atom is a fantastic sounding & compact amplifier with streaming and high-resolution music Streaming capabilities. Airplay & Bluetooth Connection available.

2 x Optical TOSLink (up to 24bit/96kHz)
1 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x HDMI ARC
1 x RCA
2 x USB Type A socket (front and rear)

1 x Stereo power amplifier
1 x RCA sub/pre output
1 x 3.5mm headphone jack

Typical use: 90W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

Remote control, Power-Line Lite mains cable (UK denominations only), cleaning cloth and quick start guide.

The ci45 is suited to larger spaces; it has all the features of the ci30 but with greater bass extension and dynamism.

A large on-wall home theatre loudspeaker, featuring four 5" long-throw woofers and a 27mm tweeter. The sub produces additional low-frequencies that the regular ci140 cannot produce. Perfect for home theatre installations and studios. 

The Ci90slim offers the same performance as the Ci30 and Ci45 in a long, slim cabinet. It is the retrofit option, fitting between standard studwork.

The ci30 is the smallest of the range, perfect for in-ceiling, in-wall or on-wall mounting. Ideal for surround channels, Dolby Atmos® and stereo in smaller rooms.

With a second bass driver, the ci65 delivers more bass. It’s ideal for use as a surround speaker in medium-to-large theatres.

Revel

Performa3 floorstanding loudspeakers are true full-range loudspeakers with small footprints and sleek design. They deliver an impressive combination of wide frequency range, uncompressed dynamic range, and low distortion across the entire audible spectrum.

F208 floor-standing loudspeakers are true full-range loudspeakers with small footprints and sleek design.

The Revel F226Be is a compact floor-standing speaker.

An integrated amplifier with a wide range of amplification improvements from previous models including a built-in phono stage and headphone amplifier. 

Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Headphone Output:1/4 inch (6.35mm) TRS Socket

NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

Typical use: 15W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W


Dual-tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

Mu-so Qb 2nd Generation

The premium compact wireless speaker.