Naim

The Naim Uniti Atom is a fantastic sounding & compact amplifier with streaming and high-resolution music Streaming capabilities. Airplay & Bluetooth Connection available.

A one-box music-streaming system powerful enough to drive the most demanding loudspeakers to fill large spaces, thanks to Naim’s incorporation of the finest class D amplification technology. Designed and engineered in Britain, this new Power Edition is a feat of 50 years of engineering innovation, culminating in our most efficient, powerful, and ecological streaming all-in-one product to date.

2 x USB Type A Socket (front and rear – 1.6A charge)

2 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)

Serve up to 4 network-connected players via UPnP™ at full CD quality. Party Mode Streaming: Sync up to six Uniti or other Naim streamers, and control via the Focal & Naim app.

ALAC (Apple Lossless) - up to 24bit/384Hz

Gapless playback supported on all formats

Burst power 2Ω
(1kHz for 20mS, repeat 500mS IHF)

Digital inputs: -10.6dBfs (max. sensitivity: -18.25dBfs)

Analogue inputs: 770mV (max. sensitivity: 65mV)

Signal to noise ratio ref 1W 8Ω A-weighted

Signal to noise ratio ref 100W 8Ω A-weighted

Focal & Naim app control (iOS and Android), Bi-directional ZigBee remote

Update your system wirelessly via the Focal & Naim app.

Ethernet (10/100Mbps), Wi-Fi antennas (802.11 b/g/n/ac) built into heatsink (patent GB2524815B)

120W
(Power consumption will vary depending on the size and type of attached USB devices)

The Naim Uniti Atom Headphone Edition Is A Fantastic Sounding & Compact Headphone Amplifier With Streaming. High-Resolution Music Streaming Capabilities, Airplay & Bluetooth Connection.

Digital: 2x Optical S/PDIF up to 96kHz, Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
Analogue: 1 x Stereo RCA pair
USB: 2x USB 2.0 (Type A connector)
Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio, Qobuz

Balanced XLR Preamp output
RCA Preamp output

Document pack, cleaning cloth, remote, AAA batteries and power lead.

Power Consumption Typical use: 17W
Network Standby mode: No-network Standby mode: Auto Standby time User selectable: adjustable from off up to 2 hour

The Naim Mu-so 2nd Generation is Wireless Bluetooth Music System with Apple Airplay 2, Spotify Connect & TIDAL Compatibility.


Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio

Digital (S/PDIF): Optical S/PDIF up to 96khz


Typical use: 17W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W

Dual tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

Typical use: 15W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W


Dual-tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

The Uniti Star is Naim Audio’s premium music streamer that offers the ability to play, rip and store your music collection. With a host of features, the Uniti Star aims to be a one-stop shop for your music streaming needs.

2 x Optical TOSLink (up to 24bit/96kHz)
2 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x BNC (up to 192kHz, DoP 64Fs)
1 x HDMI ARC
1 x RCA
1 x 5-pin DIN
2 x USB Type A socket (front and rear)
1 x SD card

1 x Stereo power amplifier
1 x RCA sub/pre output
1 x 3.5mm headphone jack

Typical use: 130W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

Remote control, Power-Line Lite mains cable (UK denominations only), cleaning cloth and quick start guide.

A all-in-one music-streaming player. Enjoy exceptional sound from your Television, music and radio stations.  Uniti Nova handles all the top music streaming services including Spotify, Apple Music, TIDAL and Qobuz. It also streams Apple AirPlay 2, Chromecast and contains a Bluetooth playback.

2 x Optical TOSLink (up to 24bit/96kHz )
2 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x BNC (up to 192kHz, DoP 64Fs)
1 x HDMI ARC
2 x RCA
2 x 5-pin DIN
2 x USB Type A socket (front and rear)
1 x SD card

Typical use: 140W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

Steinway Lyngdorf

Steinway & Sons P300 2.1 surround sound processor from Steinway Lyngdorf is built for the demanding connoisseur, who requires the ultimate performance in immersive formats as well as stereo. With the new state-of-the-art HDMI and decoder boards, the P300 2.1 pass-through 4K-60Hz video with full decoding of 16 native channels and support of up to 256 speakers – all with RoomPerfect™ room correction and intelligent bass management.

Audio: 5 x HDMI™ (≤192kHz/24bit), 1 x AES/EBU S/P-DIF input (192kHz/24bit), 3 x S/P-DIF coaxial inputs (192kHz/24bit), 4 x S/P-DIF optical inputs (≤96Hz/24bit), 1 x USB audio input (≤192kHz/32bit), 1 x microphone input (XLR) for RoomPerfect™, 1 x balanced stereo analog input (XLR), 4 x single ended stereo analog inputs (RCA), 1 x multichannel single ended analog input (RCA)
Video: 5 x HDMITM (2.1 – HDCP 2.3), accepts 8k30 RGB/YCbCr 4:4:4 10-bit video, 8k60 YCbCr 4:2:0 10-bit high definition video, and 4k120 4:4:4 10-bit high frame rate video, Variable refresh rate (VRR), fast vactive (FVA), and auto low latency mode ALLM) support. accepts HDR, Dolby Vision™ and HLG

Audio: 5 x Steinway Lyngdorf Digital Links (CAT 5e based), 1 x single ended stereo analog output for secondary audio output (Zone 2), 1 x SPDIF coax digital stereo output for secondary audio output (Zone 2 / Fix: 96kHz/24bit)
Video: 2 x HDMI™ (2.1b, eARC compatible)

Frequency response: ±0,5dB from 20 to 20,000 Hz

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB connectors (backup, updates + FAT32 media storage), 1 x SD card slot (backup – storage for system software and settings)

The Head Unit Processor is an in-room processor and together with the gold-plated brass volume wheel, it is the perfect partner for Steinway & Sons Model O, B, C, and D speaker systems.

12 native channels, Dolby Atmos®, Dolby Digital, EX & Plus, Dolby TrueHD, DTS:X, AURO-3D®, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS 96/24, DTS-HD High Res. Audio, DTS-HD Master Audio

3 x HDMI™ (≤192kHz/24bit), 3 x S/P-DIF coaxial inputs (≤192kHz/24bit), 4 x S/P- DIF optical inputs (≤96Hz/24bit), 1 x USB audio input (≤192/24bit), 1 x microphone input (XLR) for RoomPerfect™ calibration

1 x S/P-DIF coaxial digital output (fixed 96kHz/24bit), 1 x RCA analog output

Internet radio (vTuner), Airplay, Spotify connect, Local file playback, DLNA Support (see formats here), Roon Ready

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB connectors, 1 x SD card slot, (Backup – storage for system software and settings)

The Steinway & Sons P100 is equipped with the advanced technologies for which Steinway Lyngdorf is known, including RoomPerfect™ and fully digital signal processing. P100 supports all video resolutions up to 600MHz pixel clock, including 4K with the new high dynamic range formats. With the built-in media player, the P100 is ideal as a media center for smaller installations.

Dolby® Atmos, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby TrueHD, DTS, DTS ES Discrete 6.1, DTS ES Matrix 6.1, DTS 96/24, DTS-HD High Resolution Audio, DTS-HD Master Audio, Auro-3D®, 10 channels

Audio: 1 x AES/EBU S/P-DIF input, 3 x S/P-DIF coaxial inputs, 4 x S/P-DIF optical inputs, 1 x USB audio input (≤192kHz/32bit), 1 x balanced stereo analog input (XLR), 4 x single ended stereo analog inputs (RCA), 1 x multichannel single ended analog input (RCA), 1 x microphone input (XLR – Video: 3 x HDMI™

Audio: 5 x Steinway Lyngdorf Digital Links (CAT 5e based), 1 x single ended stereo analog output for secondary audio output, 1 x SPDIF coax digital out- put, 1 x HDMI™ – Video: 1 x HDMI™ – ARC compatible

RS232, Ip, Web interface, Ihiji, Remote Control App on iOS and Android platforms

The Steinway Lyngdorf remote control for stereo and surround sound systems features a rotating wheel crafted from solid, gold-plated or chrome-plated brass and mounted on precision-machined Swiss bearings.

It’s elegance you can touch, integrity you can feel. It provides intuitive and total command of your Steinway Lyngdorf system.

2 x Optical TOSLink (up to 24bit/96kHz)
1 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x HDMI ARC
1 x RCA
2 x USB Type A socket (front and rear)

Typical use: 90W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

Uniti Atom HDMI

The Naim Uniti Atom is a fantastic sounding & compact amplifier with streaming and high-resolution music Streaming capabilities. Airplay & Bluetooth Connection available.