Chord Electronics

The ULTIMA 6 is the next-generation of the ULTIMA family stereo amplifiers.

with legs

Protect both devices with the official Chord Electronics leather case.

Qutest is a standalone DAC whose performance belies its compact dimensions. With DAC architecture based on the award-winning Hugo 2, Qutest offers class-leading digital conversion.

USB Type B (White): 44.1kHz to 768kHz – 16bit to 32bit

2x BNC Coax (Red): 44.1kHz – 384kHz – 16bit to 32bit

1x Dual data mode input (using both BNC coax inputs together): 44.1kHz to 768kHz – 16bit to 32bit

Optical (Green): 44.1kHz to 96kHz – 16bit to 24bit

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 717.6kHz, and 768kHz. 16 – 32bit

Native playback supported. DSD64 (Single) to DSD512 (Octa-DSD)

Fixed, but selectable between 3v (blue), 2v (green), and 1v (red) via dual press of ‘Filter’ + ‘Input’ upon startup

 Driverless with Mac OS X and Linux, driver required for Windows OS

Chord Electronics custom coded Xilinx Artix 7 (XC7A15T) FPGA

THD and noise at 3v RMS: 117dB at 1kHz 300ohms ‘A’ weighted (reference 2.5v)

Updated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.

-1dB @ 0.2Hz to 46kHz and -3dB 0.1Hz to 200kHz

Based on 30 years of amplifier-building expertise, Huei offers MM/MC compatibility and integrates turntables to amplifiers.

Benefitting from both Moving Magnet and Moving Coil functionality, Huei offers compatibility with a huge range of cartridges thanks to comprehensive gain and impedance-matching options; Huei’s high- and low-gain switching settings are easily accessible via front-panel controls, introducing welcome flexibility.

Moving coil: 100Ω – 3,700Ω, 12-step user selectable

Moving magnet: 21dB – 42dB, 8-step user selectable

Moving coil: 49dB – 68dB, 8-step user selectable

The TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.

100w RMS per channel @ 0.016% distortion into 4Ω

ULTIMA PRE 2 is built to complement stereo systems.

The UTLIMA PRE 3 is a low noise preamplifier. 

The UTLIMA PRE 3 is equipped with five analogue inputs (two balanced and three unbalanced) all of which benefit from individual buffering and are filtered against potential ingress from radio frequency interference.

Externally, the PRE 3 benefits from a central circular power sphere flanked by a new volume control and balance/AV bypass selector, both of which benefit from a new ergonomic knob design.

Additional features include an AV bypass, plus a 5 V charging USB Type-A port.

The Qutest System Stand is carefully designed and precision-machined in England from a single billet of aircraft-grade aluminium.

CNC machined aircraft-grade aluminium with black anodising

Featuring our all-new circuit topology, ULTIMA 3 is a thoroughly modern amplifier for the high-resolution age.

Featuring technology derived from the aerospace industry, the Étude is a compact stereo amplifier with stunning power, speed and clarity.

150w RMS per channel @ 0.05% distortion into 4Ω

Clearaudio

Balance V2 combines three key devices in one: preamplifier, phono stage and headphone amplifier


75 μs / 318 μs / 3180 μs, 2 passive filter

Max. consumption: 6.6 watts
Standby mode: <0.3 watts
Off mode: 0.0 watts

Goldmund

A preamplifier with a wide range of purely analogue inputs. The 37S is a two-box system that includes a separate power supply. This product can be paired with any high-end power amplifier.

These values for any level to maximum output level.
+/- 0 dB, 20 – 20 kHz.
+/- 3 dB, 0.2 – 900 kHz.

With 1 Vrms output level, 80 KHz measurement bandwidth, 600 ohms termination impedance.
THD unbalanced input to unbalanced output: 0.002 % flat with frequency.
THD balanced input to balanced out: 0.001 % flat with frequency.
IMD unbalanced input to unbalanced output: 0.002 %.
IMD balanced input to balanced out: 0.001 %.


Input impedance: 39 kOhms.
Maximum input level (balanced): 9.6 Vrms.
Maximum input level (unbalanced): 4.8 Vrms.

Nominal line voltage: 115 or 230 V.
Input voltage range: +/-15 %.
Maximum power consumption: 70 W.

A stereo integrated amplifier that combines a digital to audio converter, preamplifier and power amplifier into one high-end one box solution.

22 kHz measurement bandwidth (flat), true RMS unloaded: 100 dB.


IMD (SMPTE), unloaded: < 0.02 %.
THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6 dBFS.

Nominal line voltage: 115 V or 230 V.
Input voltage range: +/- 15 %.

An integrated stereo amplifier, the smaller sibling of the Telos 590 NextGen. An all in one solution with a select range of digital and analogue sources.

22 kHz measurement bandwidth (flat): > 100 dB.

THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 VRMS output.
IMD (SMPTE), unloaded: < 0.02 % before clipping.

USB device:
– Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).
– Sample rate up to 384 kHz/Bit depth up to 32.
– DSD over PCM capabilities.

1 x Toslink Optical or Digital S/PDIF coaxial RCA 75 Ohms.
1 x Analog RCA (Left & Right).

Nominal line voltage: 117 or 234 V (switchable).
Fuse 8A for 110V and 220V.
Input voltage range: +/- 10 %.

IEC 60065, 1/8 Output Power at 8 Ω: 240 W (per unit).

The best in-class stereo amplifier that delivers 450W of power. This product can be paired with any high-end power preamplifier.

22 kHz measurement bandwidth (flat), true RMS unloaded: 118 dB.


IMD (SMPTE), unloaded: < 0.04 %.
THD+N, unloaded: < 0.04 % from 20 Hz to 20 kHz at 20 Vrms output.


Max level before clipping, Analog input: 1 Vrms.


Nominal line voltage: 115 V or 230 V (+/- 15 %).
Fuse: 8 A.

IMD (SMPTE), unloaded: < 0.05 %.
THD+N, unloaded: < 0.05 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6.6 dBFS.


Protect your Mojo 2 with the official Chord Electronics leather case.

The 2yu is a digital interface that connects with 2go to create a network bridge for use with a DAC, DAC-equipped device or the Hugo M Scaler.

In order for 2yu to inherit streaming/music transport capabilities or function as an audio interface, a connection with 2go is required.

Micro USB (5v 1amp minimum required) – through 2go

44.1kHz – 768kHZ | DSD 64 to DSD 256 (Dependant on output)

Integrated, automatic downsampling is provided if a higher sample rate is being played than the output can support.

USB Type-A (44.1kHz – 768kHz / DSD 256)