Naim

An integrated amplifier with a wide range of amplification improvements from previous models including a built-in phono stage and headphone amplifier. 

Mu-so Wood Edition is a Contemporary and Minimalist Design for the Multi-Award-Winning Wireless Speaker.


Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio

Digital (S/PDIF): Optical S/PDIF up to 96khz


Typical use: 17W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W

Dual tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

2 x optical TOSLink (up to 24bit/96kHz)
1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x coaxial BNC (up to 24bit/192kHz, DoP 64Fs)

Typical use: 25W (when using a single 555 PS)
Network standby mode: <2W
Deep sleep: <0.5W

Pair of Burndy interconnect cables (Analogue and digital), Metal Zigbee® remote (inc batteries), Hi-Line interconnect cable, BNC to RCA adapter, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guid

The Naim Uniti Atom Headphone Edition Is A Fantastic Sounding & Compact Headphone Amplifier With Streaming. High-Resolution Music Streaming Capabilities, Airplay & Bluetooth Connection.

Digital: 2x Optical S/PDIF up to 96kHz, Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
Analogue: 1 x Stereo RCA pair
USB: 2x USB 2.0 (Type A connector)
Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio, Qobuz

Balanced XLR Preamp output
RCA Preamp output

Document pack, cleaning cloth, remote, AAA batteries and power lead.

Power Consumption Typical use: 17W
Network Standby mode: No-network Standby mode: Auto Standby time User selectable: adjustable from off up to 2 hour

The NAC 282 is a preamplifier with DIN and RCA connection. is a step up from the NAC 202, which includes the NAPSC power supply unit optionally available on its sibling. 

Other Inputs: AV input configurable for unity gain

Audio Outputs: 2 x variable (DIN), 3 x fixed (DIN)

Power Supply Options: NAP 155 XS, NAP 200, FlatCap XS, HiCap, SuperCap

A power amplifier in a slim package. The amplifier a 70W power amplifier with five analogue inputs plus a phono stage to power everything from speakers, turntables and headphones.

MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges

Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V

Powered Accessory Sockets: +24V for Naim phono amplifier

Speaker Outputs: 70W per channel into 8 ohms (4mm sockets), 100W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Line Outputs Fixed (level): AV (DIN), Stream (DIN) 130mV, 600 ohms

Headphone Output: 1/4 inch (6.35mm) TRS Socket


NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

A preamplifier that is the next step up from the NAC 152XS. This preamplifier provides a wide range of expansion and upgrade options including connection to a phono stage and connection to an external AV amplifier. Features support for both DIN and RCA inputs as well as smart infrared integration for a remote control. 

Analogue: 2 x variable (DIN), 3 x line level

Made for the compact disk enthusiast, this CD player features simple playback and usability that you would expect from a classic CD player.

Mains Supply: 100V, 115V, 230V; 50 or 60Hz


NARCOM-4 Remote Control, Power-Line Lite mains cable (UK denominations only)

The NAC 252 is an evolution of the classic NAC 52, a high-end preamplifier with a wide range of connections available.

Pro-Ject

Innovative miniature sized phono preamplifier with tube output and high end sound.

Premium class phono preamplifier with MM & MC capability

Phono Box DS2 is a highly adjustable phono pre-amplifier suitable for all common MM and MC cartridges. With the ability to switch easily between input impedance and capacitance, as well as gain on front it becomes one of the most user friendly phono stages at this price point.

Rotel

The Michi X3 Integrated Amplifier delivers uncompromised audio performance conveniently packaged in an elegant industrial design. The X3 delivers 350 Watts of Class AB output power into 4 ohm loads maintaining musical accuracy with exceptional acoustic detail from the Analog, Digital, PC-USB, apt-X Bluetooth and Moving Magnet Phono Stage source inputs.

Line Level Inputs: 10Hz - 100kHz (+0dB, -0.4dB)Digital Inputs: 20Hz - 20kHz (0 ± 0.4dB)Phono Input: 20Hz - 20kHz (+0dB, +0.4dB)

The Michi S5 Stereo Amplifier delivers 500 watts per channel into 8 ohms loads with best in class audio performance. The dual monoblock design includes twin, oversized, in-house manufactured toroidal transformers for exceptional bass energy while maintaining control and precision of the finest detail all packaged in an elegant design.

The Michi P5 Control Amplifier delivers the ultimate culmination of audio performance with a full complement of source inputs. The meticulous circuit design, critical component selection and over 3 years in the making ensures the P5 meets the highest of standards allowing this preamplifier to proudly wear the Michi logo.

Line Level Inputs: 10Hz - 100kHz (±0.3dB)Digital Inputs: 20Hz - 20kHz (±0.3dB)Phono Input: 20Hz - 20kHz (±0.3dB)

Sonos

Bring the Sonos experience to your floor-standing, architectural, outdoor or bookshelf speakers, and connect your TV or turntable. Stream music, radio, audiobooks and more from all your favourite services, and enjoy easy control with the Sonos app, Apple AirPlay 2, a universal remote or keypad and your voice with a compatible device.

Connect to WiFi with any 802.11b/g/n 2.4 GHz broadcast-capable router. For 5 GHz routers, you can either enable 2.4 GHz 802.11b/g/n in router settings or hardwire a Sonos product.

Custom-designed banana plugs (2) that can be swapped for standard diameter banana plugs.

10/100 port for hardwiring to your router

Connect an audio device using an RCA cable.

Auto-detecting RCA type, user-adjustable 50-110 Hz crossover

Works with AirPlay 2 on Apple devices iOS 11.4 and higher on WiFi

Steinway Lyngdorf

Combined with the A1 or A2 fully digital amplifier, the SP-1 stereo sound processor is totally noise immune; all the traditional devices in the signal path are replaced by one sound processor and fully digital amplifiers. The result is precise control, without noise, at any sound levels.

Digital (≤192kHz/24bit): 4 x S/PDIF (coax), 6 x Toslink (optical), 1 x USB (audio input) – Analog: 4 x single-ended, input for microphone

3 x Steinway Lyngdorf Digital Link (CAT 5e based)

1 x Trigger input, 1 x IR sensor input, 1 x USB (software update), 1 x RJ 12 (RS 232 control)

Launched as part of a trio, the NDX 2 is the smaller 

Streaming: Chromecast built-in, Apple AirPlay, TIDAL, Spotify® Connect, Bluetooth (AptX HD), Internet Radio, UPnP™ (hi-res streaming), Roon Ready

USB: 2 x USB Type A socket (front and rear - 1.6A charge)

Digital (S/PDIF): 2 x Optical TOSLink (up to 24bit/96kHz)
1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x coaxial BNC (up to 24bit 192kHz, DoP 64Fs)


1 x RCA pair
1 x 5-pin DIN
Digital 1 x coaxial BNC

Typical use: 19W
Network standby mode: <2W
Deep sleep: <0.5W

Zigbee® remote (inc. batteries), Power-Line Lite cable (UK denominations only), Burndy link plug, 5-pin DIN interconnect cable, BNC to RCA adaptor, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guide

A modern yet classic design housed in an aluminium enclosure, this amplifier delivers 80W per channel.

Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Headphone Output:1/4 inch (6.35mm) TRS Socket

NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

SuperNAIT 3

An integrated amplifier with a wide range of amplification improvements from previous models including a built-in phono stage and headphone amplifier.