Arcam

The Solo Uno brings total simplicity to the complex world of audio streaming by providing a compact, stylish and elegant streamer with a built-in amplifier.

Class leading super-efficient amplifier design

A simple system that only requires two speakers, the Solo Uno and an app

Google Cast, AirPlay 2, Roon Ready, UPnP Streamer

The Solo Uno features a full MQA decoder, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording in the highest possible sound quality. At this level of playback you are hearing what was created in the studio – with precise file and platform-specific DAC compensation and management.

Optimised for low noise and minimum distortion

Power requirements: 100 – 240VAC, 50/60Hz

The AVR10 is a high-performance audio/visual receiver that delivers stunning realism for the ultimate home cinema experience. With an impressive 12-channel surround solution and featuring all the latest CODECs from Dolby, DTS, Auro-3D and IMAX Enhanced, the AVR10 exemplifies sound quality and engineering excellence.

Dolby Atmos , IMAX Enhanced, Auro-3D & DTS:X 7.1.4 decoding

7 HDMI inputs, 2 HDMI outputs, eARC compatible

Google Cast/UPnP capability for streaming audio

Free MusicLife iOS and Android UPnP and control app

Mains voltage: 110–120V or 220–240V, 50–60Hz 

Power consumption (maximum): 1.5kW (Thermal dissipation approx. 5200 BTU/hour) 

Power consumption (idle, typical): 90W (Thermal dissipation approx. 340 BTU/hour)

SA30 is a Class G Intelligent Integrated Amplifier designed with all the latest cutting-edge features - Class G is expertly implemented and, the highest resolution of audio support is presented. Simple streaming is available with a mobile device using the native app of choice via Apple AirPlay2 or Google Chromecast.


Class G amplification for impeccable sound and efficiency

120W of power per channel into 8Ω, 220W into 4Ω

5 analogue inputs including switchable MM/MC PHONO input

The SA30 features a full MQA decoder, which enables you to play back MQA audio files and streams, delivering the sound of the original master recording in the highest possible sound quality. At this level of playback you are hearing what was created in the studio – with precise file and platform-specific DAC compensation and management.

Full I/P control including Control4 and Crestron

Total harmonic distortion + noise = 0.002%

Mains voltage: 110–120V or 220–240V, 50/60Hz 

A versatile integrated amplifier that combines the best of analogue and digital with it's built in digital to analogue connection. As well as the three digital inputs and phono stage, the SA20 is also equipped with three analogue RCA inputs and a front-mounted 3.5mm AUX input.

Total harmonic distortion + noise = 0.003%

Chord Electronics

Updated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.

with legs

-1dB @ 0.2Hz to 46kHz and -3dB 0.1Hz to 200kHz

Based on 30 years of amplifier-building expertise, Huei offers MM/MC compatibility and integrates turntables to amplifiers.

Benefitting from both Moving Magnet and Moving Coil functionality, Huei offers compatibility with a huge range of cartridges thanks to comprehensive gain and impedance-matching options; Huei’s high- and low-gain switching settings are easily accessible via front-panel controls, introducing welcome flexibility.

Moving coil: 100Ω – 3,700Ω, 12-step user selectable

Moving magnet: 21dB – 42dB, 8-step user selectable

Moving coil: 49dB – 68dB, 8-step user selectable

The TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.

100w RMS per channel @ 0.016% distortion into 4Ω

ULTIMA PRE 2 is built to complement stereo systems.

The UTLIMA PRE 3 is a low noise preamplifier. 

The UTLIMA PRE 3 is equipped with five analogue inputs (two balanced and three unbalanced) all of which benefit from individual buffering and are filtered against potential ingress from radio frequency interference.

Externally, the PRE 3 benefits from a central circular power sphere flanked by a new volume control and balance/AV bypass selector, both of which benefit from a new ergonomic knob design.

Additional features include an AV bypass, plus a 5 V charging USB Type-A port.

Anni is a desktop integrated amplifier that introduces our next-generation ULTIMA technology to both headphones and compact loudspeakers.

Mojo 2 is an advanced DAC/headphone amplifier to power your favourite headphones. 

Coaxial, dual-data coax, optical, Micro-USB and USB-C

2.7 uV A wt., no measurable noise floor modulation

118 dB stereo separation 1 kHz 300 ohms 2.5 V

The PA410 is a high-performance power amplifier that delivers 4 channels of efficient Class AB amplification. With an impressive 70W per channel, the PA410 is designed to offer the greatest flexibility and power without compromising on control.

4 x 50W Class AB amplification (8ohm, 20Hz-20kHz, 0.2% THD)

Continuous power output at 0.2% THD per channel

Four channels driven, 4Ω / 8Ω, 20Hz – 20kHz - 70W / 50W

Two channels driven, 4Ω / 8Ω, 20Hz – 20kHz - 90W / 60W

Harmonic distortion, 80% power, 8Ω at 1kHz - 0.003%

Mains voltage: 110–120V or 220–240V, 50–60Hz

Extremely efficient class A/B amplification

SA10

Class AB Integrated Amplifier