Chord Electronics

Poly is a portable music streamer/player that combines with Mojo to wirelessly stream from connected devices and playback from its Micro SD, all with smartphone control. It enables hi-fi sound quality at home or on-the-go, with Wi-Fi, Bluetooth, AirPlay and network connectivity and upgrades headphone, car and home audio performance.

Protect both devices with the official Chord Electronics leather case.

Qutest is a standalone DAC whose performance belies its compact dimensions. With DAC architecture based on the award-winning Hugo 2, Qutest offers class-leading digital conversion.

USB Type B (White): 44.1kHz to 768kHz – 16bit to 32bit

2x BNC Coax (Red): 44.1kHz – 384kHz – 16bit to 32bit

1x Dual data mode input (using both BNC coax inputs together): 44.1kHz to 768kHz – 16bit to 32bit

Optical (Green): 44.1kHz to 96kHz – 16bit to 24bit

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 717.6kHz, and 768kHz. 16 – 32bit

Native playback supported. DSD64 (Single) to DSD512 (Octa-DSD)

Fixed, but selectable between 3v (blue), 2v (green), and 1v (red) via dual press of ‘Filter’ + ‘Input’ upon startup

 Driverless with Mac OS X and Linux, driver required for Windows OS

Chord Electronics custom coded Xilinx Artix 7 (XC7A15T) FPGA

THD and noise at 3v RMS: 117dB at 1kHz 300ohms ‘A’ weighted (reference 2.5v)

Updated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.

with legs

-1dB @ 0.2Hz to 46kHz and -3dB 0.1Hz to 200kHz

Based on 30 years of amplifier-building expertise, Huei offers MM/MC compatibility and integrates turntables to amplifiers.

Benefitting from both Moving Magnet and Moving Coil functionality, Huei offers compatibility with a huge range of cartridges thanks to comprehensive gain and impedance-matching options; Huei’s high- and low-gain switching settings are easily accessible via front-panel controls, introducing welcome flexibility.

Moving coil: 100Ω – 3,700Ω, 12-step user selectable

Moving magnet: 21dB – 42dB, 8-step user selectable

Moving coil: 49dB – 68dB, 8-step user selectable

The TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.

100w RMS per channel @ 0.016% distortion into 4Ω

ULTIMA PRE 2 is built to complement stereo systems.

The UTLIMA PRE 3 is a low noise preamplifier. 

The UTLIMA PRE 3 is equipped with five analogue inputs (two balanced and three unbalanced) all of which benefit from individual buffering and are filtered against potential ingress from radio frequency interference.

Externally, the PRE 3 benefits from a central circular power sphere flanked by a new volume control and balance/AV bypass selector, both of which benefit from a new ergonomic knob design.

Additional features include an AV bypass, plus a 5 V charging USB Type-A port.

The Qutest System Stand is carefully designed and precision-machined in England from a single billet of aircraft-grade aluminium.

CNC machined aircraft-grade aluminium with black anodising

The 2go streamer/server transforms the abilities of the Hugo 2, adding both Ethernet and wireless streaming, plus 4 TB of microSD card storage to the DAC/pre/headphone amp

In order for 2go to perform as a fully functional streamer, a connection with Hugo 2 (DAC/Preamp/Headphone amp) or 2yu is required.

Internal battery with up-to 10 hrs (approx) playback. Desktop mode activated upon insertion of Micro USB charging cable).

Connect to (allows 2go to connect to an existing 2.4GHz WiFi network) or Hotspot mode (activated within the Gofigure app, which allows 2go to broadcast its own WiFi network with SSID and password in the eventuality that the device cannot connect to a static network).

44.1kHz – 768kHZ (16bit – 32bit) | DSD 64 to DSD 256 (via DoP)

ACC, WAV, FLAC, AIFF, OGG VORBIS, ALAC, WMA, MP3 

Initial setup, configuration, and updates

Via free Gofigure app available on iOS and Google Play store

2x Onboard Micro SD card slots (up-to 4TB of total storage)

Roon endpoint, DLNA (server and render), AirPlay, Bluetooth audio (A2DP), Tidal, Qobuz, Internet radio

The 2yu is a digital interface that connects with 2go to create a network bridge for use with a DAC, DAC-equipped device or the Hugo M Scaler.

In order for 2yu to inherit streaming/music transport capabilities or function as an audio interface, a connection with 2go is required.

Micro USB (5v 1amp minimum required) – through 2go

44.1kHz – 768kHZ | DSD 64 to DSD 256 (Dependant on output)

Integrated, automatic downsampling is provided if a higher sample rate is being played than the output can support.

USB Type-A (44.1kHz – 768kHz / DSD 256)

Goldmund

A convenient wireless hub that connects all the sources – TV, computer, players and audio servers.

In1 RCA S/PDIF.
In2 Toslink optical.
In3 USB Audio Class 2.0 (no driver required on Mac OS X as of v.10.6.4 nor on Linux, driver required only for Windows).Any inputs from 1 to 3 can receive stereo audio encoded signal up to 384 kHz/Bit depth up to 32 compatible DSD over PCM.

4 parallel Digital RCA S/PDIF 2-channel outputs.
1 Wireless outputs 4 channels max.
1 monitor headphone output (on front panel).

Nominal line voltage: 115V or 230 V (switchable).
Input voltage range: +/- 15 %.
Rated power consumption: 11 W.
1,6 A delayed fuse.
ON/OFF power switch key.
Main voltage selector.

Lyngdorf

The MP-40 surround sound processor from Lyngdorf Audio offers all the sonic qualities and performance of the flagship processor, the MP-60, in a streamlined design for smaller applications.

12 decoding/up mixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)

The MP-60 2.1 is an AV amplifier equipped with all the advanced technologies for which Lyngdorf Audio is known, including the renowned room correction system RoomPerfect and the unsurpassed quality in digital signal processing.

16 decoding/up mixing channels, Dolby Atmos®, DTS:X Pro (14 channels), AURO-3D® (14 channels), all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz

RoomPerfect, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

The TDAI-1120 is a small integrated amplifier with room correction and streaming.

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz THD-N 1w/8ohm 0,04%, THD-N 1w/4ohm 0,04%

RoomPerfect™, Pre-Equaliser, ICC, 32 x adjustable voicing holding ≤8 filters with adjustable gain and Q

2 x 120 W RMS @ 4Ohm / 2 x 60 W RMS @ 8Ohm

Mark Levinson

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs.

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path

Discrete, balanced R-2R ladder volume control for precision and performance

Class-A Pure Phono stage with custom configuration for MC and MM cartridge compatibility

Integrated Main Drive fully balanced class-A headphone preamplifier circuitry

Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Balanced, single-ended and headphone outputs

The Mark Levinson No 5206 is Dual-Monoaural Pre-amplifier.

Pure Path class-A analog signal with two awarded patents

32 Bit/384 kHz Precision Link II DAC with 4x DSD Capability

Class-A high pass subwoofer filterPremium hybrid topography phono stage

Selectable capacitive and resistive load settings

Bluetooth audio input including aptX HD support

Balanced XLR and single-ended RCA outputs

Mojo 2 is an advanced DAC/headphone amplifier to power your favourite headphones. 

Coaxial, dual-data coax, optical, Micro-USB and USB-C

2.7 uV A wt., no measurable noise floor modulation

118 dB stereo separation 1 kHz 300 ohms 2.5 V

Rechargeable LiPo 2200mAh9-hour + playtime and fast-charging via USB

Support for all major file types including

ACC, WAV, FLAC, AIFF, OGG VORBIS, ALAC, WMA and MP3

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 358.8kHz, 384kHz,717.6kHz and 768kHz; DSD via DoP sample rates: DSD64 – DSD256 (Quad-DSD); DSD from SD card

iPhone, iPad, Android phones/tablets, Windows and Mac OS X computers and DAPs

Poly can create its own hotspot where networks/devices/countries don’t support tethering

allows configuration of connected networks (up to 32)