Mark Levinson

The Mark Levinson No 5206 is Dual-Monoaural Pre-amplifier.

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs.

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path

Discrete, balanced R-2R ladder volume control for precision and performance

Class-A Pure Phono stage with custom configuration for MC and MM cartridge compatibility

Integrated Main Drive fully balanced class-A headphone preamplifier circuitry

Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Balanced, single-ended and headphone outputs

The No. 515 is a premium turntable designed and built in collaboration with recognized leader VPI Industries.

First-class analog source designed for the Pure Phono stage found in the № 523, № 526 and № 585.5 preamplifiers

Custom gimbal-mounted, 3D-printed tonearm with integral headshell

Included Ortofon Cadenza Bronze moving coil phono cartridge (№ 515MC only)

Integrated motor-drive electronics, comprising two low-distortion oscillators and a class-AB electronics

Optimised drive system with mechanically isolated enclosure and triple-belt drive

Stainless steel shaft spinning in an inverted phosphor bronze bushing

Precision-machined pulley and triple-belt drive system

Highly damped, vinyl-wrapped MDF and aluminium sandwich main chassis

Machined Delrin and aluminium feet with a vibration-damping polymer core

Platter machined from solid aluminium with an MDF damping layer rotates on an inverted bearing

The Mark Levinson No 585 is a comprehensive and accomplished high-end integrated amplifier.

Pure Path Phono preamp — a discrete design with no op-amps and operates exclusively in class A throughout

High resolution sound from class-A/B amps

Fixed-gain moving magnet (MM) section with 5 capacitive cartridge-loading settings

Moving coil (MC) section with three gain settings and 10 resistive cartridge-loading settings

Ultrasonic filter intelligently compensates for rumble and warping

32-bit/192khz performance, including DSD over PCM via USB 80Hz high-pass option allows proper operation of a 2.1-channel system

Ethernet, RS-232, IR and 12V trigger ports

The Mark Levinson № 5805 is a high-quality preamplifier that contains a phono stage and amplifier in one seamless package.

1 x USB 2.0, 1 x coaxial S/PDIF, and 2 x optical S/PDIF

384 kHz/32 bit PCM and DSD 11.2 MHz capability

Bluetooth audio input including aptX HD support

MQA full decoding on all digital inputs including asynchronous USB

Analog Inputs: 1 x balanced XLR stereo, 2 x RCA stereo, 1 x RCA Phono (MM/MC)

Headphone output: 1 x 1/4-inch/6.35mm jack (front panel)

Speaker outputs: 2 pairs high-current binding posts

The Mark Levinson № 5105 is a premium precision-engineered turntable.

Glass and aluminium front panel feature speed and standby controlsIntegrated bubble level

Optional factory-installed Ortofon moving coil phono cartridge

Fully digital motor electronics with 33/45 speed selections

Handcrafted from a solid, brushed aluminium plinth precision machined from a single billet

14 lb. solid aluminium platter with backside coated in resonance damping material

This 3-in-1 audio player combines a Super Audio CD player, high-resolution network streaming capability and Precision Link II Digital-to-Analog Converter (DAC).

3-in-1 companion source for Nº 5805 or Nº 5802

The Mark Levinson No 5802 is a integrated amplifier with onboard DAC

Featuring adaptive ANC to reduce background noise, the Mark Levinson № 5909 delivers reference-quality sound via 40 mm beryllium-coated drivers and high-resolution Bluetooth 5.1 connectivity.

Digital circuitry compatible with 24-bit/96kHz processing

Expertly tuned 40 mm Beryllium coated drivers acoustically optimized to the HARMAN Curve

Bluetooth 5.1 with LDAC, AAC and aptX™ Adaptive technologies

Adaptive Active Noise Cancellation (ANC) with three modes

Ambient Aware mode for situational awareness while on the go

Four-microphone voice array with Smart Wind Adaption

Available colors include Pearl Black, Ice Pewter, Radiant Red

Premium leather headband and replaceable leather ear cushions

Automotive-grade metallic painted ear cups

Up to 34 hours battery life; 30 hours playtime with ANC enabled

Up to 6 hours playtime with 15-minute quick charge

The Mark Levinson® № 526 is a 12-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage, 32-bit Precision Link DAC, and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs for enthusiasts of all music formats.

Class-A Pure Phono stage with physically separated channels for MC and MM

32-bit Precision Link DAC with three selectable filters and seven power supplies

Class-A Main Drive headphone output for up to 32-ohm headphones using main circuit

Supports high-resolution PCM (up to 32-bit, 192 kHz) and DSD (up to 5.6 MHz)

Balanced, single-ended, and headphone outputs

The Mark Levinson® № 519 Audio Player combines wireless and wired streaming from networked libraries and streaming services, CD player, and connections for USB drives, digital audio inputs, and Bluetooth® with aptX®.

Digital Inputs: 1 balanced (XLR); 2 coaxial (RCA); 2 optical (Toslink); 1 USB-B asynchronous

Class-A Main Drive Headphone output uses main line stage to directly drive headphones down to 32 ohms

Selectable fixed or variable line outputs for use with an analog preamp or for direct connection to amplifiers or active loudspeakers

Analog Outputs: 1 balanced (XLR); 1 pair single-ended (RCA), 1 headphone (¼", 6.3mm TS)

Digital Outputs: 1 balanced (XLR); 1 single-ended (RCA), 1 optical (Toslink)

McIntosh

The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC).

The C53 is a 2-channel solid state stereo preamp featuring McIntosh's new upgradeable DA2 Digital Audio Module with a Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC).

Comes with DA2 Digital Audio Module installed

The C1100 Preamplifier is comprised of the C1100 Controller and the C1100 Vacuum Tube Preamplifier. Inside each, the left and right channels are electrically and mechanically isolated from each other to allow true dual mono operation

12 analog inputs including Moving Coil & Moving Magnet phono

5 analog inputs (1 balanced, 2 unbalanced, 2 phono)

Optional dealer installed upgrade to DA2 Digital Audio Module available

Moving Coil and Moving Magnet phono inputs

Pure Path class-A analog signal with two awarded patents

32 Bit/384 kHz Precision Link II DAC with 4x DSD Capability

Class-A high pass subwoofer filterPremium hybrid topography phono stage

Selectable capacitive and resistive load settings

Balanced XLR and single-ended RCA outputs