Mark Levinson

The Mark Levinson № 5105 is a premium precision-engineered turntable.

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs.

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path

Discrete, balanced R-2R ladder volume control for precision and performance

Class-A Pure Phono stage with custom configuration for MC and MM cartridge compatibility

Integrated Main Drive fully balanced class-A headphone preamplifier circuitry

Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Balanced, single-ended and headphone outputs

The No. 515 is a premium turntable designed and built in collaboration with recognized leader VPI Industries.

First-class analog source designed for the Pure Phono stage found in the № 523, № 526 and № 585.5 preamplifiers

Custom gimbal-mounted, 3D-printed tonearm with integral headshell

Included Ortofon Cadenza Bronze moving coil phono cartridge (№ 515MC only)

Integrated motor-drive electronics, comprising two low-distortion oscillators and a class-AB electronics

Optimised drive system with mechanically isolated enclosure and triple-belt drive

Stainless steel shaft spinning in an inverted phosphor bronze bushing

Precision-machined pulley and triple-belt drive system

Highly damped, vinyl-wrapped MDF and aluminium sandwich main chassis

Machined Delrin and aluminium feet with a vibration-damping polymer core

Platter machined from solid aluminium with an MDF damping layer rotates on an inverted bearing

The Mark Levinson No 585 is a comprehensive and accomplished high-end integrated amplifier.

Pure Path Phono preamp — a discrete design with no op-amps and operates exclusively in class A throughout

High resolution sound from class-A/B amps

Fixed-gain moving magnet (MM) section with 5 capacitive cartridge-loading settings

Moving coil (MC) section with three gain settings and 10 resistive cartridge-loading settings

Ultrasonic filter intelligently compensates for rumble and warping

32-bit/192khz performance, including DSD over PCM via USB 80Hz high-pass option allows proper operation of a 2.1-channel system

Ethernet, RS-232, IR and 12V trigger ports

The Mark Levinson No 5206 is Dual-Monoaural Pre-amplifier.

Pure Path class-A analog signal with two awarded patents

32 Bit/384 kHz Precision Link II DAC with 4x DSD Capability

Class-A high pass subwoofer filterPremium hybrid topography phono stage

Selectable capacitive and resistive load settings

Bluetooth audio input including aptX HD support

Balanced XLR and single-ended RCA outputs

The Mark Levinson № 5805 is a high-quality preamplifier that contains a phono stage and amplifier in one seamless package.

1 x USB 2.0, 1 x coaxial S/PDIF, and 2 x optical S/PDIF

384 kHz/32 bit PCM and DSD 11.2 MHz capability

MQA full decoding on all digital inputs including asynchronous USB

Analog Inputs: 1 x balanced XLR stereo, 2 x RCA stereo, 1 x RCA Phono (MM/MC)

Headphone output: 1 x 1/4-inch/6.35mm jack (front panel)

Speaker outputs: 2 pairs high-current binding posts

This 3-in-1 audio player combines a Super Audio CD player, high-resolution network streaming capability and Precision Link II Digital-to-Analog Converter (DAC).

3-in-1 companion source for Nº 5805 or Nº 5802

The Mark Levinson No 5802 is a integrated amplifier with onboard DAC

Featuring adaptive ANC to reduce background noise, the Mark Levinson № 5909 delivers reference-quality sound via 40 mm beryllium-coated drivers and high-resolution Bluetooth 5.1 connectivity.

Digital circuitry compatible with 24-bit/96kHz processing

Expertly tuned 40 mm Beryllium coated drivers acoustically optimized to the HARMAN Curve

Bluetooth 5.1 with LDAC, AAC and aptX™ Adaptive technologies

Adaptive Active Noise Cancellation (ANC) with three modes

Ambient Aware mode for situational awareness while on the go

Four-microphone voice array with Smart Wind Adaption

Available colors include Pearl Black, Ice Pewter, Radiant Red

Premium leather headband and replaceable leather ear cushions

Automotive-grade metallic painted ear cups

Up to 34 hours battery life; 30 hours playtime with ANC enabled

Up to 6 hours playtime with 15-minute quick charge

Pro-Ject

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble. The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge. A TPE-damped counterweight eliminates unwanted resonances.

The RPM 5 Carbon is available with or without Ortofon 2M-Silver cartridge. A super shielded, semi-symmetrical, low-capacitance Pro-Ject Connect it E phono cable is included.

The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium. Together with the low friction bearings, this guarantees accuracy in use. The integrated headshell won‘t cause any additional vibrations either. The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

The Classic meets the 175 VPO to melt design-ideas

The new Classic Evo is based on the successful EISA Award winner Pro-Ject.

The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. 

Clearaudio

The core of the turntable body is made of medium-density fiberboard or optionally, solid wood layers bonded under high pressure. The top layer of the turntable is made of specially satin-finished plastic. This composition minimizes resonances and ensures a perfect visual appearance.

The platter is driven by a polished flat belt from a completely decoupled direct current motor to minimize the transmission of interference noise. A generously dimensioned, highly stable, and outsourced power supply takes care of the voltage supply.

The new control technology with integrated auto-calibration, new adjustment options, and additional Tacho-Speed-Control („TSC“) achieves even better measurements in terms of uniformity and impulse stability. The entirely newly developed Tacho-Speed-Control constantly monitors the speed and provides real-time feedback to the control electronics. This allows it to immediately respond to changing influences such as decreasing belt tension, friction of the platter bearing, or temperature fluctuations. Additionally, TSC performs an automatic calibration at every restart. With the new concept Signature, manual recalibration is also possible at the push of a button on the back of the turntable.

30mm / 1.18 inch main platter, made out of synthetic material with high-density and excellent dimension / precision CNC machined aluminium sub-platter

Polished and tempered steel spindle in a sintered bronze bushing, running on a teflon thrust-pad

Max. consumption: 3.6 watts
Consumption in operation: 1.92 watts
Standby: 0.74 watts
Off mode: 0.0 watts (switched off at the rear)

Finished as a one-piece, with no resonance-inducing headshell, the X1 is available with premounted high quality Pick it S2 MM cartridge. Its superstiff and perfectly damped construction provides a perfect tracking of the record groove.

15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat

The X2 B comes with mini XRL and RCA outputs and with our standard semi-balanced Connect it Phono E RCA cable. By upgrading it to our fully balanced mini XLR to mini XLR version (available separately) and using a balanced phono stage, like our Phono Box S3 B or DS3 B, you are fully set-up for the True Balanced experience. This leads to increased dynamics, less noise and improved signal to noise ratios. You can imagine it, like hearing parts of your music that literally were not there before.

Glass and aluminium front panel feature speed and standby controlsIntegrated bubble level

Optional factory-installed Ortofon moving coil phono cartridge

Fully digital motor electronics with 33/45 speed selections

Handcrafted from a solid, brushed aluminium plinth precision machined from a single billet

14 lb. solid aluminium platter with backside coated in resonance damping material

No 5105

The Mark Levinson № 5105 is a premium precision-engineered turntable.