Naim

ur highly dynamic monoblock power amplifier

A benchmark amplifier; a pair of NAP 350s offer precise musical performance. Designed to effortlessly drive large and demanding loudspeakers, capturing the true dynamics of music.

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

2 x optical TOSLink (up to 24bit/96kHz)
1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x coaxial BNC (up to 24bit/192kHz, DoP 64Fs)

Typical use: 25W (when using a single 555 PS)
Network standby mode: <2W
Deep sleep: <0.5W

Pair of Burndy interconnect cables (Analogue and digital), Metal Zigbee® remote (inc batteries), Hi-Line interconnect cable, BNC to RCA adapter, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guid

The Naim Uniti Atom Headphone Edition Is A Fantastic Sounding & Compact Headphone Amplifier With Streaming. High-Resolution Music Streaming Capabilities, Airplay & Bluetooth Connection.

Digital: 2x Optical S/PDIF up to 96kHz, Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
Analogue: 1 x Stereo RCA pair
USB: 2x USB 2.0 (Type A connector)
Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio, Qobuz

Balanced XLR Preamp output
RCA Preamp output

Document pack, cleaning cloth, remote, AAA batteries and power lead.

Power Consumption Typical use: 17W
Network Standby mode: No-network Standby mode: Auto Standby time User selectable: adjustable from off up to 2 hour

A power amplifier in a slim package. The amplifier a 70W power amplifier with five analogue inputs plus a phono stage to power everything from speakers, turntables and headphones.

MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges

Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V

Powered Accessory Sockets: +24V for Naim phono amplifier

Speaker Outputs: 70W per channel into 8 ohms (4mm sockets), 100W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Line Outputs Fixed (level): AV (DIN), Stream (DIN) 130mV, 600 ohms

Headphone Output: 1/4 inch (6.35mm) TRS Socket


NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

Made for the compact disk enthusiast, this CD player features simple playback and usability that you would expect from a classic CD player.

Mains Supply: 100V, 115V, 230V; 50 or 60Hz


NARCOM-4 Remote Control, Power-Line Lite mains cable (UK denominations only)

The Naim Mu-so 2nd Generation is Wireless Bluetooth Music System with Apple Airplay 2, Spotify Connect & TIDAL Compatibility.


Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio

Digital (S/PDIF): Optical S/PDIF up to 96khz


Typical use: 17W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W

Dual tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

The Uniti Core is the ultimate music manager, able to create bit-perfect copies of your favourite CDs and serve them and the rest of your digital music collection up to music players around your home.


Typical Use (no storage attached): 6.7W
Network Standby (no storage attached): <2W
Deep Sleep: <0.5W
Network Standby (with internal or USB HDD attached): > 15W*.


*Actual power consumption will vary depending on the size and type of attached internal HDD or USB devices

Note: Power consumption will be increased with the addition of user fitted storage (typical increase of approximately 8W for an internal HDD, dependant on the specification of storage).


Power-Line Lite mains cable (UK only), standard mains cable (international markets), cleaning cloth, drive caddy screws, BNC to Phono Connector and quick start guide.


Please note: not sold with an internal hard drive - features a removable caddy into which an HDD or SSD can be installed

The Naim Uniti Atom is a fantastic sounding & compact amplifier with streaming and high-resolution music Streaming capabilities. Airplay & Bluetooth Connection available.

2 x Optical TOSLink (up to 24bit/96kHz)
1 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x HDMI ARC
1 x RCA
2 x USB Type A socket (front and rear)

1 x Stereo power amplifier
1 x RCA sub/pre output
1 x 3.5mm headphone jack

Typical use: 90W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

Remote control, Power-Line Lite mains cable (UK denominations only), cleaning cloth and quick start guide.

Chord Electronics

BerTTi is a fully balanced 75-watt stereo power amplifier benefitting from the latest dual-feed-forward error-correction topology. First unveiled at HIGH END, Munich, 2023, BerTTi directly replaces its predecessor, the TToby. It also expands the British built ULTIMA-topology range amplifiers designed by Chord Electronics owner and founder John Franks. Franks’ advanced ULTIMA error-correction technology monitors and immediately corrects signals before the output stage for astonishing accuracy.

Pro-Ject

Finished as a one-piece, with no resonance-inducing headshell, the X1 is available with premounted high quality Pick it S2 MM cartridge. Its superstiff and perfectly damped construction provides a perfect tracking of the record groove.

15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat

The NAC 332 preamplifier is the digitally controlled, pure analogue centre of your system. Each and every audio stage is meticulously designed using discrete transistors, building on 50 years of experience in manufacturing high-performance audio systems. It features a precision fixed resistor volume control and a class-A headphone amplifier, with XLR and RCA outputs.

Bi-directional ZigBee remote and front panel.
Inter-product communications with NSS 333 via ZigBee
Optical 3.5mm output for synchronised control of compatible products
e.g. NAP 250/350

1 x 8-pin DIN (47kΩ, 2.2V typical, 9.5Vrms Max)

2 x 5-pin DIN (47kΩ, 2.2V typical, 9.5Vrms Max)

3 x RCA pair (47kΩ, 2.2V typical, 9.5Vrms Max)

2 x XLR balanced pair (100kΩ, 2.2V typical, 9.5V max)

8-pin DIN has +/-18V (for compatible external phono stages e.g. NVC TT)

Line: 0.003% @2.2V input volume at 0dB, 1kHz

(Line: 0.018% @2.2V input volume at 0dB, 20kHz

1 x 6.35mm headphone jack (1.5W into 16Ω)

Line: 0.003% @2.2V input volume at 0dB, 1kHz
(Line: 0.018% @2.2V input volume at 0dB, 20kHz)

Line: 90dB at 1kHz, volume at 0dB
(Line: 70dB at 20kHz, volume at 0dB)

Typical use consumption: 20W
Network stanby mode consumption: <2W
Standby mode consumption: <0.5W


Signal to noise ratio ref 100W 8 A-weighted

Signal to noise ratio ref 1W 8 A-weighted

1 x 34kΩ singled ended via legacy adaptor lead

NAP 350

ur highly dynamic monoblock power amplifierA benchmark amplifier; a pair of NAP 350s offer precise musical performance. Designed to effortlessly drive large and demanding loudspeakers, capturing the true dynamics of music.

ur highly dynamic monoblock power amplifier
A benchmark amplifier; a pair of NAP 350s offer precise musical performance. Designed to effortlessly drive large and demanding loudspeakers, capturing the true dynamics of music.