Naim

The original amplifier refreshed in 2015 to deliver better performance. Features a large custom-designed transformer, 70W per channel as well as an internal power supply to allow direct connection to a preamplifier such as NAC 152 XS, NAC 202 or NAC 282.

Mu-so Wood Edition is a Contemporary and Minimalist Design for the Multi-Award-Winning Wireless Speaker.


Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio

Digital (S/PDIF): Optical S/PDIF up to 96khz


Typical use: 17W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W

Dual tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

2 x optical TOSLink (up to 24bit/96kHz)
1 x coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x coaxial BNC (up to 24bit/192kHz, DoP 64Fs)

Typical use: 25W (when using a single 555 PS)
Network standby mode: <2W
Deep sleep: <0.5W

Pair of Burndy interconnect cables (Analogue and digital), Metal Zigbee® remote (inc batteries), Hi-Line interconnect cable, BNC to RCA adapter, Wi-Fi (x2) and Bluetooth antennae, cleaning cloth, quick start guid

The Naim Uniti Atom Headphone Edition Is A Fantastic Sounding & Compact Headphone Amplifier With Streaming. High-Resolution Music Streaming Capabilities, Airplay & Bluetooth Connection.

Digital: 2x Optical S/PDIF up to 96kHz, Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
Analogue: 1 x Stereo RCA pair
USB: 2x USB 2.0 (Type A connector)
Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio, Qobuz

Balanced XLR Preamp output
RCA Preamp output

Document pack, cleaning cloth, remote, AAA batteries and power lead.

Power Consumption Typical use: 17W
Network Standby mode: No-network Standby mode: Auto Standby time User selectable: adjustable from off up to 2 hour

The NAC 282 is a preamplifier with DIN and RCA connection. is a step up from the NAC 202, which includes the NAPSC power supply unit optionally available on its sibling. 

Other Inputs: AV input configurable for unity gain

Audio Outputs: 2 x variable (DIN), 3 x fixed (DIN)

Power Supply Options: NAP 155 XS, NAP 200, FlatCap XS, HiCap, SuperCap

A power amplifier in a slim package. The amplifier a 70W power amplifier with five analogue inputs plus a phono stage to power everything from speakers, turntables and headphones.

MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges

Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V

Powered Accessory Sockets: +24V for Naim phono amplifier

Speaker Outputs: 70W per channel into 8 ohms (4mm sockets), 100W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Line Outputs Fixed (level): AV (DIN), Stream (DIN) 130mV, 600 ohms

Headphone Output: 1/4 inch (6.35mm) TRS Socket


NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

A preamplifier that is the next step up from the NAC 152XS. This preamplifier provides a wide range of expansion and upgrade options including connection to a phono stage and connection to an external AV amplifier. Features support for both DIN and RCA inputs as well as smart infrared integration for a remote control. 

Analogue: 2 x variable (DIN), 3 x line level

Made for the compact disk enthusiast, this CD player features simple playback and usability that you would expect from a classic CD player.

Mains Supply: 100V, 115V, 230V; 50 or 60Hz


NARCOM-4 Remote Control, Power-Line Lite mains cable (UK denominations only)

A modern yet classic design housed in an aluminium enclosure, this amplifier delivers 80W per channel.

Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

An integrated amplifier with a wide range of amplification improvements from previous models including a built-in phono stage and headphone amplifier. 

Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Headphone Output:1/4 inch (6.35mm) TRS Socket

NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

The NAC 252 is an evolution of the classic NAC 52, a high-end preamplifier with a wide range of connections available.

Pro-Ject

Innovative miniature sized phono preamplifier with tube output and high end sound.

Premium class phono preamplifier with MM & MC capability

Phono Box DS2 is a highly adjustable phono pre-amplifier suitable for all common MM and MC cartridges. With the ability to switch easily between input impedance and capacitance, as well as gain on front it becomes one of the most user friendly phono stages at this price point.

Rotel

The Michi X3 Integrated Amplifier delivers uncompromised audio performance conveniently packaged in an elegant industrial design. The X3 delivers 350 Watts of Class AB output power into 4 ohm loads maintaining musical accuracy with exceptional acoustic detail from the Analog, Digital, PC-USB, apt-X Bluetooth and Moving Magnet Phono Stage source inputs.

Line Level Inputs: 10Hz - 100kHz (+0dB, -0.4dB)Digital Inputs: 20Hz - 20kHz (0 ± 0.4dB)Phono Input: 20Hz - 20kHz (+0dB, +0.4dB)

The Michi S5 Stereo Amplifier delivers 500 watts per channel into 8 ohms loads with best in class audio performance. The dual monoblock design includes twin, oversized, in-house manufactured toroidal transformers for exceptional bass energy while maintaining control and precision of the finest detail all packaged in an elegant design.


SNAIC, Power-Line Lite mains cable (UK denominations only)

NAP 200 DR

The original amplifier refreshed in 2015 to deliver better performance. Features a large custom-designed transformer, 70W per channel as well as an internal power supply to allow direct connection to a preamplifier such as NAC 152 XS, NAC 202 or NAC 282.