Lyngdorf

The MP-60 2.1 is an AV amplifier equipped with all the advanced technologies for which Lyngdorf Audio is known, including the renowned room correction system RoomPerfect and the unsurpassed quality in digital signal processing.

The MXA-8400 is the most powerful product from Lyngdorf Audio ever, delivering 8 x 400 watts of ultra-linear and stable power. It incorporates Purifi EIGENTAKT technology with the innovative EIGENTAKT ErrorCorrection (EEC), Lyngdorf Audio’s highly efficient and advanced power supply PowerPerfect, ultra-low-noise and precise analog input stages, and a 4-layer main PCB optimized for the best signal purity and grounding. With this range of features, the MXA-8400 sets new amplifier benchmarks in audio quality, measured performance, and reliability.

8 x 400 W @4Ω (2-CHANNEL mode), 8 x 200 W @8Ω (2-CHANNEL mode), 4 x 800 W @8Ω (BRIDGE mode)


8 x 340 W @4Ω (2-CHANNEL mode), 8 x 200 W @8Ω (2-CHANNEL mode)


15 minutes (at no input signal, in LOW POWER mode)

0.001% @200 W, 8Ω / 340 W, 4Ω, 20Hz-20kHz, 0.0006% @10 W, 4Ω, 20Hz-20kHz, LOW Sensitivity mode, 0.0007% @10 W, 4Ω, 20Hz-20kHz, HIGH Sensitivity mode


 58V peak (2-CHANNEL mode), 116V peak (BRIDGE mode))
Gain: HIGH Sensitivity mode: 26.1 dB (2-CHANNEL mode), 31.7 dB (BRIDGE mode)

16.6 dB (2-CHANNEL mode) 22.2 dB (BRIDGE mode)

128dB (A-weighted ref. rated power, LOW Sensitivity mode)

HIGH Sensitivity mode2V, LOW Sensitivity mode 6V


This two-way, full range loudspeaker brings our compact speaker designs to a new level of performance with the genuine musicality characterizing Lyngdorf Audio.

The MP-40 surround sound processor from Lyngdorf Audio offers all the sonic qualities and performance of the flagship processor, the MP-60, in a streamlined design for smaller applications.

12 decoding/up mixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)

Lyngdorf TDAI-3400 is powerful and advanced digital amplifier.

2-channel integrated amplifier and audio processor

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz, THD-N 1w/8ohm 0,04% / THD-N 1w/4ohm 0,04%

RoomPerfect™, Pre-Equaliser, ICC, 32 x adjustable voicing holding ≤8 filters with adjustable gain and Q

The MP-40 2.1 multichannel processor from Lyngdorf Audio offers the same sonic qualities and performance of the flagship processor, the MP-60 2.1, in a streamlined design for smaller immersive or surround sound home cinemas where less decoding channels are required.The MP-40 2.1 features 12 native channel decoding and 16 balanced audio outputs and offers full support of the immersive surround formats DOLBY ATMOS®, DTS:X® and AURO-3D® as well as 8K and 3D video, HDCP 2.3, and advanced HDMI switching. Ease of installation and user-friendly features are complemented with a simplified feature allowing the chance for one to experience the performance that Lyngdorf Audio is famous for without all the bells and whistles

12 decoding/upmixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs


Dolby Surround, AURO-MATIC®, DTS Neural:X


3 x HDMI (1 x HDMI eARC) ≤192kHz/24bit, 1 x AES/EBU S/P-DIF input (≤192kHz/24bit), 3 x S/P-DIF coaxial inputs (≤192kHz/24bit), 4 x S/P-DIF optical inputs (≤96Hz/24bit), 1 x USB audio input (≤192kHz/32bit), 1 x microphone input (XLR) for RoomPerfect


16 x XLR analog outputs (16 Vrms), 1 x SPDIF coax digital ZONE output (Fix 96kHz/24bit)

RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicings holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q


Internet radio (vTuner, airable), AirPlay 2, Spotify Connect, Tidal Connect with Dolby Atmos Music, Roon Ready, DLNA Support of FAT32 based media storage (uPnP/

3 x HDMI 2.1 (HDCP 2.3), accepts 8k30 RGB/YCbCr 4:4:4 10-bit video, 8k60 YCbCr 4:2:0 10-bit high definition video, 4k120 4:4:4 10-bit high frame rate video, variable refresh rate (VRR), fast vactive (FVA), and auto low latency mode (ALLM) support, accepts HDR, Dolby Vision™ and HLG


1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)


RoomPerfect™ microphone, Microphone stand, Microphone cable, RF remote control

The Lyngdorf CD-2 is a pure audio CD player.

1 x Coaxial Digital (galvanic isolated), 1 x Optical Digital, 1 x Analog Single Ended RCA, 1 x Analog Balanced XLR

20 – 20k Hz, +/- 0.02dB THD + N: 0.0018%

A high-end design loudspeaker from Lyngdorf Audio

While digital amplifiers are the DNA of Lyngdorf Audio, loudspeakers are part of the company since its foundation. The Cue-100 is another milestone in Lyngdorf Audio’s speaker history. This high-end audio loudspeaker merges modern Danish design with the latest and best speaker technology. Designed and made at Lyngdorf Audio in Skive, Denmark, the Cue-100 is the perfect loudspeaker for audiophile enthusiasts as well as design-conscious music lovers.

Air Motion Transformer, Kapton foil, Neodymium magnet


18 cm / 6.5-inch Aluminum cone, 39 mm 4-layer copper-clad aluminum voice coil on fiberglass former, Neutral surround geometry, Die-cast vented basket

2 x 18 cm / 6.5-inch passive radiator, Aluminum cone, Neutral surround geometry, Die-cast vented basket

The MH-2 speakers are satellite speakers that can hold their ground on their own, but they are designed to be complemented by one or more high-end subwoofers.

The TDAI-1120 is a small integrated amplifier with room correction and streaming.

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz THD-N 1w/8ohm 0,04%, THD-N 1w/4ohm 0,04%

2 x 120 W RMS @ 4Ohm / 2 x 60 W RMS @ 8Ohm

McIntosh

The C53 is a 2-channel solid state stereo preamp featuring McIntosh's new upgradeable DA2 Digital Audio Module with a Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC).

Comes with DA2 Digital Audio Module installed

5 analog inputs (1 balanced, 2 unbalanced, 2 phono)

Optional dealer installed upgrade to DA2 Digital Audio Module available

Moving Coil and Moving Magnet phono inputs

Naim

A one-box music-streaming system powerful enough to drive the most demanding loudspeakers to fill large spaces, thanks to Naim’s incorporation of the finest class D amplification technology. Designed and engineered in Britain, this new Power Edition is a feat of 50 years of engineering innovation, culminating in our most efficient, powerful, and ecological streaming all-in-one product to date.

2 x USB Type A Socket (front and rear – 1.6A charge)

2 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)

Serve up to 4 network-connected players via UPnP™ at full CD quality. Party Mode Streaming: Sync up to six Uniti or other Naim streamers, and control via the Focal & Naim app.

ALAC (Apple Lossless) - up to 24bit/384Hz

Gapless playback supported on all formats

Burst power 2Ω
(1kHz for 20mS, repeat 500mS IHF)

Digital inputs: -10.6dBfs (max. sensitivity: -18.25dBfs)

Analogue inputs: 770mV (max. sensitivity: 65mV)

Signal to noise ratio ref 1W 8Ω A-weighted

Signal to noise ratio ref 100W 8Ω A-weighted

Focal & Naim app control (iOS and Android), Bi-directional ZigBee remote

Update your system wirelessly via the Focal & Naim app.

Ethernet (10/100Mbps), Wi-Fi antennas (802.11 b/g/n/ac) built into heatsink (patent GB2524815B)

120W
(Power consumption will vary depending on the size and type of attached USB devices)

The Naim Uniti Atom is a fantastic sounding & compact amplifier with streaming and high-resolution music Streaming capabilities. Airplay & Bluetooth Connection available.

2 x Optical TOSLink (up to 24bit/96kHz)
1 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x HDMI ARC
1 x RCA
2 x USB Type A socket (front and rear)

1 x Stereo power amplifier
1 x RCA sub/pre output
1 x 3.5mm headphone jack

Typical use: 90W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

Remote control, Power-Line Lite mains cable (UK denominations only), cleaning cloth and quick start guide.

The Uniti Star is Naim Audio’s premium music streamer that offers the ability to play, rip and store your music collection. With a host of features, the Uniti Star aims to be a one-stop shop for your music streaming needs.

2 x Optical TOSLink (up to 24bit/96kHz)
2 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x BNC (up to 192kHz, DoP 64Fs)
1 x HDMI ARC
1 x RCA
1 x 5-pin DIN
2 x USB Type A socket (front and rear)
1 x SD card

Typical use: 130W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

A all-in-one music-streaming player. Enjoy exceptional sound from your Television, music and radio stations.  Uniti Nova handles all the top music streaming services including Spotify, Apple Music, TIDAL and Qobuz. It also streams Apple AirPlay 2, Chromecast and contains a Bluetooth playback.

2 x Optical TOSLink (up to 24bit/96kHz )
2 x Coaxial RCA (up to 24bit/192kHz, DoP 64Fs)
1 x BNC (up to 192kHz, DoP 64Fs)
1 x HDMI ARC
2 x RCA
2 x 5-pin DIN
2 x USB Type A socket (front and rear)
1 x SD card

Typical use: 140W
Network standby mode: <2W
Deep sleep: <0.5W
Network Standby (with SD Card and/or USB devices attached): > 15W*.
*Actual power consumption will vary depending on the size and type of attached SD card or USB devices

16 decoding/up mixing channels, Dolby Atmos®, DTS:X Pro (14 channels), AURO-3D® (14 channels), all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz

RoomPerfect, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q