McIntosh

McIntosh MC901 is an all-in-one valve and solid-state power amplifier. The 300-watt valve amplifier works alongside a 600-watt solid-state amplifier in one unified chassis.

The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC).

The C53 is a 2-channel solid state stereo preamp featuring McIntosh's new upgradeable DA2 Digital Audio Module with a Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC).

Comes with DA2 Digital Audio Module installed

The C1100 Preamplifier is comprised of the C1100 Controller and the C1100 Vacuum Tube Preamplifier. Inside each, the left and right channels are electrically and mechanically isolated from each other to allow true dual mono operation

12 analog inputs including Moving Coil & Moving Magnet phono

The MC2301 is the first McIntosh vacuum tube amplifier to use our Quad Balanced design. This design cancels virtually all noise and distortion in the audio signal. As a result, even when amplified to high levels the signal is effectively free of any distortion.

McIntosh MC2KW is a 1-Channel Solid State Amplifier.


The MC2152 70th Anniversary Vacuum Tube Amplifier is a 150 Watt per channel stereo amplifier.

Unity Coupled Circuit Output Transformers

(8) KT88, (4) 12AX7A and (4) 12AT7 vacuum tubes

Striking new design with carbon fibre side panels

5 analog inputs (1 balanced, 2 unbalanced, 2 phono)

Optional dealer installed upgrade to DA2 Digital Audio Module available

Moving Coil and Moving Magnet phono inputs

The MC1502 Vacuum Tube Amplifier is a stereo amplifier designed for home audio and home music systems that produces 150 Watts per channel.

The McIntosh MC830 is a 1-Channel Solid State Amplifier that features an open chassis industrial design

Power Guard, Sentry Monitor, Monogrammed Heatsinks, Solid Cinch speaker binding posts

The McIntosh MC1.25KW is 1-Channel Solid State Amplifier.

McIntosh MC275 mk VI is a 2 Channel Valve Power Amplifier. 

Naim

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

The ultimate solution for bi-amping loudspeakers: 300 Watt vacuum tube amplifier and 600 Watt solid state amplifier on one chassis

Vacuum tube section powers mid and upper drivers

Solid state section drives power hungry woofers