McIntosh

The McIntosh MC1.25KW is 1-Channel Solid State Amplifier.

The D1100 Digital Preamplifier is a reference level stereo preamplifier and digital-to-analog converter (DAC).

The C53 is a 2-channel solid state stereo preamp featuring McIntosh's new upgradeable DA2 Digital Audio Module with a Quad Balanced, 8-channel, 32-bit Digital-to-Analog Converter (DAC).

Comes with DA2 Digital Audio Module installed

The C1100 Preamplifier is comprised of the C1100 Controller and the C1100 Vacuum Tube Preamplifier. Inside each, the left and right channels are electrically and mechanically isolated from each other to allow true dual mono operation

12 analog inputs including Moving Coil & Moving Magnet phono

McIntosh MC901 is an all-in-one valve and solid-state power amplifier. The 300-watt valve amplifier works alongside a 600-watt solid-state amplifier in one unified chassis.

The ultimate solution for bi-amping loudspeakers: 300 Watt vacuum tube amplifier and 600 Watt solid state amplifier on one chassis

Vacuum tube section powers mid and upper drivers

Solid state section drives power hungry woofers

The MC2301 is the first McIntosh vacuum tube amplifier to use our Quad Balanced design. This design cancels virtually all noise and distortion in the audio signal. As a result, even when amplified to high levels the signal is effectively free of any distortion.

McIntosh MC2KW is a 1-Channel Solid State Amplifier.


The MC2152 70th Anniversary Vacuum Tube Amplifier is a 150 Watt per channel stereo amplifier.

Unity Coupled Circuit Output Transformers

(8) KT88, (4) 12AX7A and (4) 12AT7 vacuum tubes

Striking new design with carbon fibre side panels

5 analog inputs (1 balanced, 2 unbalanced, 2 phono)

Optional dealer installed upgrade to DA2 Digital Audio Module available

McIntosh MC275 mk VI is a 2 Channel Valve Power Amplifier. 

Naim

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

The NAC 282 is a preamplifier with DIN and RCA connection. is a step up from the NAC 202, which includes the NAPSC power supply unit optionally available on its sibling. 

Other Inputs: AV input configurable for unity gain

Audio Outputs: 2 x variable (DIN), 3 x fixed (DIN)

Power Supply Options: NAP 155 XS, NAP 200, FlatCap XS, HiCap, SuperCap

A power amplifier in a slim package. The amplifier a 70W power amplifier with five analogue inputs plus a phono stage to power everything from speakers, turntables and headphones.

MM Phono Input: via RCA, 47k parallel 470pF input impedance, suitable for 5mV cartridges

Line Level Inputs: 130mV sensitivity, 47k input impedance, suitable for 2V

Powered Accessory Sockets: +24V for Naim phono amplifier

Speaker Outputs: 70W per channel into 8 ohms (4mm sockets), 100W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Line Outputs Fixed (level): AV (DIN), Stream (DIN) 130mV, 600 ohms

Headphone Output: 1/4 inch (6.35mm) TRS Socket


NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

A modern yet classic design housed in an aluminium enclosure, this amplifier delivers 80W per channel.

Mains Supply: 100V, 115V, 230V; 50 or 60Hz

Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

An integrated amplifier with a wide range of amplification improvements from previous models including a built-in phono stage and headphone amplifier. 

Speaker Outputs: 80W per channel into 8 ohms (4mm sockets), 130W per channel into 4 ohms

Line Outputs Variable (level): Pre-amp (DIN), Bi-amp (DIN), Sub (RCA pair) 775mV, <50 ohms

Headphone Output:1/4 inch (6.35mm) TRS Socket

NARCOM-5 Remote Control, Mains Lead, Link Plug and Safety Manual

The NAC 252 is an evolution of the classic NAC 52, a high-end preamplifier with a wide range of connections available.

Pro-Ject

Innovative miniature sized phono preamplifier with tube output and high end sound.

The C70 70th is a Vacuum Tube Preamplifier.  The C70 features one 12AT7 and five 12AX7A vacuum tubes that are visible through a glass panel on the top cover. All control operations are done via knobs and rocker switches.

Moving Coil and Moving Magnet phono inputs