Linn

The LP12 is the World No. 1 turntable but now the entry level Majik LP12 is also affordable.

Upgrade your existing turntable to a Linn Majik and receive up to £750 off a new Linn Majik LP12.

This offer runs until Christmas Eve so now is the time to get the turntable you always wanted.

Pro-Ject

The ultimate sub-chassis turntable for the 21st century

The transparent acrylic plinth stands on three individually height-adjustable TPE-damped aluminium cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on three magnetic fields. A magnetic sub-chassis suspension system avoids parasitic noise normally caused by conventional spring mechanism. A supplied spirit level allows easy adjustment of the sub-chassis. A quiet running AC motor unit drives the platter’s outside edge via a belt. It does incorporate an advanced DC-driven motor control, that ensures perfect speed stability and electronic speed change.

RPM 5 Carbon utilises a radical concept with a lot of innovations, that originate from its big brother RPM 9 Carbon: A low resonance chassis holds a newly designed inverted platter bearing with ceramic ball for further reduced rumble. The acoustically inert platter is made from acrylic. An outboard 15V AC motor is smoothly driven using an ultra-precision AC generator with DC power supply for further enhanced speed stability. The classy 9“ Evo tonearm, which is made from carbon fibre is suitable for any high-quality MM or MC cartridge. A TPE-damped counterweight eliminates unwanted resonances.

The RPM 5 Carbon is available with or without Ortofon 2M-Silver cartridge. A super shielded, semi-symmetrical, low-capacitance Pro-Ject Connect it E phono cable is included.

The X2 B comes with mini XRL and RCA outputs and with our standard semi-balanced Connect it Phono E RCA cable. By upgrading it to our fully balanced mini XLR to mini XLR version (available separately) and using a balanced phono stage, like our Phono Box S3 B or DS3 B, you are fully set-up for the True Balanced experience. This leads to increased dynamics, less noise and improved signal to noise ratios. You can imagine it, like hearing parts of your music that literally were not there before.

15volts DC /0,8A power supply, Dust cover, Connect it E Phono cable, feltmat

Juke Box E1 is a record player, phono stage, BT receiver, line pre-amplifier and power amplifier in one, requiring only a pair of speakers to make a complete system. If you thought that a starter turntable system is complicated to set up, Juke Box E1 proves the contrary. This belt-drive deck offers the fastest possible installation process because it comes pre-adjusted out of the box and offers superb sound quality. Tracking force and anti-skating is pre adjusted for the pre-mounted Ortofon OM 5E cartridge.

Speakers, Line out (fixed, record player signal only), Phono out

300mm anti-resonant ABS polymer with feltmat

Power supply, dust cover, remote control, feltmat, singles adapter

The T1 tonearm is a new model, based on previous Pro-Ject designs. It is now a complete one-piece design, entirely made out of aluminium. Together with the low friction bearings, this guarantees accuracy in use. The integrated headshell won‘t cause any additional vibrations either. The belt driven motor is attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened stainless steel axle and brass bushing. Alongside the electronically controlled motor system, the T1 is therefore able to ensure a smooth, anti-resonant rotational platform for the tonearm and cartridge to ride across.

The Classic meets the 175 VPO to melt design-ideas

The new Classic Evo is based on the successful EISA Award winner Pro-Ject.

The stylish CNC-machined plinth of the T1 features no plastic parts and is carefully manufactured to ensure there are no hollow spaces inside, therefore avoiding unwanted vibrations within the chassis. Carrying this philosophy through the design, the glass platter is also a heavy, zero-resonance design. Finally, the purpose-chosen turntable feet also do a good job of isolating the T1 from ambient vibrations around your hi-fi system. In the T1 the motor drives a belt-system, attached to a newly designed sub-platter, which is mounted into an ultra-precise 0.001mm main bearing with a hardened steel axle and brass bushing – just like our Essential III turntables. The tonearm new tonearm has an effective length of 8.6”. This one-piece aluminium tonearm also features low-friction bearings for absolute accuracy in use. The T1 comes with a pre-adjusted Ortofon OM 5E Moving Magnet cartridge and is ready to use right out of the box. Also super shielded, semi-symmetrical, low-capacitance Pro-Ject phono cables are included.

Heavy 8mm, blasted-glass platter with felt mat

dustcover, feltmat, power supply, high-quality phono/line RCA cable

The Debut Carbon EVO focuses on the core aspects that make a turntable sound great. Technically correct design - expert craftsmanship - handmade in the EU. 

Lyngdorf

The MXA-8400 is the most powerful product from Lyngdorf Audio ever, delivering 8 x 400 watts of ultra-linear and stable power. It incorporates Purifi EIGENTAKT technology with the innovative EIGENTAKT ErrorCorrection (EEC), Lyngdorf Audio’s highly efficient and advanced power supply PowerPerfect, ultra-low-noise and precise analog input stages, and a 4-layer main PCB optimized for the best signal purity and grounding. With this range of features, the MXA-8400 sets new amplifier benchmarks in audio quality, measured performance, and reliability.

8 x 400 W @4Ω (2-CHANNEL mode), 8 x 200 W @8Ω (2-CHANNEL mode), 4 x 800 W @8Ω (BRIDGE mode)


8 x 340 W @4Ω (2-CHANNEL mode), 8 x 200 W @8Ω (2-CHANNEL mode)


15 minutes (at no input signal, in LOW POWER mode)

0.001% @200 W, 8Ω / 340 W, 4Ω, 20Hz-20kHz, 0.0006% @10 W, 4Ω, 20Hz-20kHz, LOW Sensitivity mode, 0.0007% @10 W, 4Ω, 20Hz-20kHz, HIGH Sensitivity mode


 58V peak (2-CHANNEL mode), 116V peak (BRIDGE mode))
Gain: HIGH Sensitivity mode: 26.1 dB (2-CHANNEL mode), 31.7 dB (BRIDGE mode)

16.6 dB (2-CHANNEL mode) 22.2 dB (BRIDGE mode)

128dB (A-weighted ref. rated power, LOW Sensitivity mode)

HIGH Sensitivity mode2V, LOW Sensitivity mode 6V


Leica

Leica make my favourite cameras. My first was an M6 film camera which I recently gave to my son. My latest is the Q3. What binds them together is the minimal styling, the finest engineering and the very best optics.

They have now turned this know how to movie projectors and have added Leica optics to two new products; the Leica Cine 1 which we have been promoting this year. Incredibly stylish, it is the only projector I have seen that can compete with a tv and still have all the cinematic qualities only a projector can offer.

The second Leica Projector is their baby Leica Play. It is tiny, projects an image of up to 160” onto a wall or screen. It has automatic set up and has most of the required Apps and has great sound from something so small.

Perfect for Gladiator (1 or 2) over the Christmas Break and small enough to take on holiday next Summer.

I think we have come full circle - and not just for Xmas………

without stand

Impressive Image Quality: 4K resolution and brilliant colours thanks to triple RGB-laser technology, Summicron lens and Leica Image Optimization (LIO™).

Easy to use: Plug-and-play setup allows for instant access to content without complicated installations.

Elegant Design: Bauhaus-inspired aesthetics with premium materials ensure durability and style.

Versatile Compatibility: Connection options via Apple Airplay, Bluetooth, Wi-Fi, as well as HDMI, USB, and LAN for seamless device integration.

High-Quality Sound: DTS Virtual: X technology for immersive sound experiences and deep bass.

Optional Stand: The elegant stand transforms the Cine Play 1 into a modern piece of art while providing neat cable management.

Standard finishes: Oak, Cherry, Black Ash, Rosenut, Walnut

Special finishes: Piano Black, Alpine White or match any colour of your choice (high gloss)

33⅓ rpm single speed motor (45 rpm supported using included adaptor)

Majik LP 12

The LP12 is the World No. 1 turntable but now the entry level Majik LP12 is also affordable.Upgrade your existing turntable to a Linn Majik and receive up to £750 off a new Linn Majik LP12.This offer runs until Christmas Eve so now is the time to get the turntable you always wanted.

The LP12 is the World No. 1 turntable but now the entry level Majik LP12 is also affordable.
Upgrade your existing turntable to a Linn Majik and receive up to £750 off a new Linn Majik LP12.
This offer runs until Christmas Eve so now is the time to get the turntable you always wanted.