Chord Electronics

Featuring technology derived from the aerospace industry, the Étude is a compact stereo amplifier with stunning power, speed and clarity.

Protect both devices with the official Chord Electronics leather case.

Qutest is a standalone DAC whose performance belies its compact dimensions. With DAC architecture based on the award-winning Hugo 2, Qutest offers class-leading digital conversion.

USB Type B (White): 44.1kHz to 768kHz – 16bit to 32bit

2x BNC Coax (Red): 44.1kHz – 384kHz – 16bit to 32bit

1x Dual data mode input (using both BNC coax inputs together): 44.1kHz to 768kHz – 16bit to 32bit

Optical (Green): 44.1kHz to 96kHz – 16bit to 24bit

44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz, 352.8kHz, 384kHz, 717.6kHz, and 768kHz. 16 – 32bit

Native playback supported. DSD64 (Single) to DSD512 (Octa-DSD)

Fixed, but selectable between 3v (blue), 2v (green), and 1v (red) via dual press of ‘Filter’ + ‘Input’ upon startup

 Driverless with Mac OS X and Linux, driver required for Windows OS

Chord Electronics custom coded Xilinx Artix 7 (XC7A15T) FPGA

THD and noise at 3v RMS: 117dB at 1kHz 300ohms ‘A’ weighted (reference 2.5v)

Updated for the modern age, the ULTIMA 2 carries the very latest Chord Electronics amplifier technology.

with legs

-1dB @ 0.2Hz to 46kHz and -3dB 0.1Hz to 200kHz

Based on 30 years of amplifier-building expertise, Huei offers MM/MC compatibility and integrates turntables to amplifiers.

Benefitting from both Moving Magnet and Moving Coil functionality, Huei offers compatibility with a huge range of cartridges thanks to comprehensive gain and impedance-matching options; Huei’s high- and low-gain switching settings are easily accessible via front-panel controls, introducing welcome flexibility.

Moving coil: 100Ω – 3,700Ω, 12-step user selectable

Moving magnet: 21dB – 42dB, 8-step user selectable

Moving coil: 49dB – 68dB, 8-step user selectable

The TToby range may be ideally suited to compact living environments, but don’t let that fool you. With similar legendary amplification derived from our SPM range, TToby doesn’t compromise on power or providing you with the purest audio experience possible.

100w RMS per channel @ 0.016% distortion into 4Ω

ULTIMA PRE 2 is built to complement stereo systems.

The UTLIMA PRE 3 is a low noise preamplifier. 

The UTLIMA PRE 3 is equipped with five analogue inputs (two balanced and three unbalanced) all of which benefit from individual buffering and are filtered against potential ingress from radio frequency interference.

Externally, the PRE 3 benefits from a central circular power sphere flanked by a new volume control and balance/AV bypass selector, both of which benefit from a new ergonomic knob design.

Additional features include an AV bypass, plus a 5 V charging USB Type-A port.

The Qutest System Stand is carefully designed and precision-machined in England from a single billet of aircraft-grade aluminium.

CNC machined aircraft-grade aluminium with black anodising

Clearaudio

Balance V2 combines three key devices in one: preamplifier, phono stage and headphone amplifier


75 μs / 318 μs / 3180 μs, 2 passive filter

Max. consumption: 6.6 watts
Standby mode: <0.3 watts
Off mode: 0.0 watts

Gold Note

Goldmund

Elevating the auditory experience to new heights, we proudly unveil the Mimesis Signature, a convergence of analogue finesse and digital prowess. This symphony of audio excellence introduces a paradigm shift in preamplification technology.

2 x Digital S/PDIF, 1 x Toslink Optical, 1 x USB AUDIO (up to 384 kHz PCM up to DSD512)

ON/OFF power switch, key Voltage input selector, RS232 Command connector

Frequency response (These values for any level to maximum output level)

+/- 0.1 dB, 10 Hz – 20 kHz, +/- 1.5 dB, 10 Hz – 100 kHz, +/- 3 dB, 10 Hz – 200 kHz

Distortion with 1 V RMS output level, 80 KHz measurement bandwidth, 600 Ohms termination impedance

THD unbalanced in to unbalanced out < 0.005% (-90 dB) flat with frequency

IMD unbalanced in to unbalanced out < 0.002% (-80 dB)

117 or 234 V (switchable) Fuse 2.5A for 110V Fuse 1A for 220V Input voltage range: +/- 10 %

A preamplifier with a wide range of purely analogue inputs. The 37S is a two-box system that includes a separate power supply. This product can be paired with any high-end power amplifier.

These values for any level to maximum output level.
+/- 0 dB, 20 – 20 kHz.
+/- 3 dB, 0.2 – 900 kHz.

With 1 Vrms output level, 80 KHz measurement bandwidth, 600 ohms termination impedance.
THD unbalanced input to unbalanced output: 0.002 % flat with frequency.
THD balanced input to balanced out: 0.001 % flat with frequency.
IMD unbalanced input to unbalanced output: 0.002 %.
IMD balanced input to balanced out: 0.001 %.


Input impedance: 39 kOhms.
Maximum input level (balanced): 9.6 Vrms.
Maximum input level (unbalanced): 4.8 Vrms.

Nominal line voltage: 115 or 230 V.
Input voltage range: +/-15 %.
Maximum power consumption: 70 W.

A stereo integrated amplifier that combines a digital to audio converter, preamplifier and power amplifier into one high-end one box solution.

22 kHz measurement bandwidth (flat), true RMS unloaded: 100 dB.


IMD (SMPTE), unloaded: < 0.02 %.
THD+N, unloaded: < 0.08 % from 20 Hz to 20 kHz at 30 Vrms output.


Analog input: 1 Vrms.
Digital input: -6 dBFS.

Nominal line voltage: 115 V or 230 V.
Input voltage range: +/- 15 %.

The official Chord Electronics Premium Leather Carry Case to protect the Hugo 2 and 2go streamer/server

ULTIMA 5 is a stereo power amplifier incorporating Chord's latest-generation ULTIMA circuit topology.

1x Stereo Pair of Gold Plated Balanced XLR Inputs

1x Stereo Pair of Gold Plated Unbalanced RCA Inputs

1x 12v Trigger Input – Chord Electronics Auto Start

1x Pair of High Quality, High Current, Gold Plated Type Speaker Terminals

150w RMS per channel @ 0.05% distortion into 4Ω

Ètude

Featuring technology derived from the aerospace industry, the Étude is a compact stereo amplifier with stunning power, speed and clarity.