Lyngdorf

The Lyngdorf CS-1 is a compact full range loudspeaker specifically designed for discreet placement inside cabinets such as lowboards, sideboards and TV furniture.

This two-way, full range loudspeaker brings our compact speaker designs to a new level of performance with the genuine musicality characterizing Lyngdorf Audio.

The MP-40 surround sound processor from Lyngdorf Audio offers all the sonic qualities and performance of the flagship processor, the MP-60, in a streamlined design for smaller applications.

12 decoding/up mixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz


RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)

Lyngdorf TDAI-3400 is powerful and advanced digital amplifier.

2-channel integrated amplifier and audio processor

Frequency Response: ±0,5dB from 20 to 20,000 Hz, Total Harmonic Distortion: 0.05% max from 20 to 20,000 Hz, THD-N 1w/8ohm 0,04% / THD-N 1w/4ohm 0,04%

RoomPerfect™, Pre-Equaliser, ICC, 32 x adjustable voicing holding ≤8 filters with adjustable gain and Q

The MP-40 2.1 multichannel processor from Lyngdorf Audio offers the same sonic qualities and performance of the flagship processor, the MP-60 2.1, in a streamlined design for smaller immersive or surround sound home cinemas where less decoding channels are required.The MP-40 2.1 features 12 native channel decoding and 16 balanced audio outputs and offers full support of the immersive surround formats DOLBY ATMOS®, DTS:X® and AURO-3D® as well as 8K and 3D video, HDCP 2.3, and advanced HDMI switching. Ease of installation and user-friendly features are complemented with a simplified feature allowing the chance for one to experience the performance that Lyngdorf Audio is famous for without all the bells and whistles

12 decoding/upmixing channels, Dolby Atmos®, DTS:X, AURO-3D®, all legacy codecs


Dolby Surround, AURO-MATIC®, DTS Neural:X


3 x HDMI (1 x HDMI eARC) ≤192kHz/24bit, 1 x AES/EBU S/P-DIF input (≤192kHz/24bit), 3 x S/P-DIF coaxial inputs (≤192kHz/24bit), 4 x S/P-DIF optical inputs (≤96Hz/24bit), 1 x USB audio input (≤192kHz/32bit), 1 x microphone input (XLR) for RoomPerfect


16 x XLR analog outputs (16 Vrms), 1 x SPDIF coax digital ZONE output (Fix 96kHz/24bit)

RoomPerfect™, Subwoofer level assistant, 32 x adjustable voicings holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q


Internet radio (vTuner, airable), AirPlay 2, Spotify Connect, Tidal Connect with Dolby Atmos Music, Roon Ready, DLNA Support of FAT32 based media storage (uPnP/

3 x HDMI 2.1 (HDCP 2.3), accepts 8k30 RGB/YCbCr 4:4:4 10-bit video, 8k60 YCbCr 4:2:0 10-bit high definition video, 4k120 4:4:4 10-bit high frame rate video, variable refresh rate (VRR), fast vactive (FVA), and auto low latency mode (ALLM) support, accepts HDR, Dolby Vision™ and HLG


1 x DB9 RS232 connector, 2 x IR sensor inputs, 1 x IR output (loop from one of the sensor inputs), 1 x trigger input, 4 x trigger outputs, 1 x RJ45 ethernet LAN connector, 2 x USB A connectors, 1 x SD card slot , (Backup – storage for system software and settings)


RoomPerfect™ microphone, Microphone stand, Microphone cable, RF remote control

The Lyngdorf CD-2 is a pure audio CD player.

1 x Coaxial Digital (galvanic isolated), 1 x Optical Digital, 1 x Analog Single Ended RCA, 1 x Analog Balanced XLR

20 – 20k Hz, +/- 0.02dB THD + N: 0.0018%

A high-end design loudspeaker from Lyngdorf Audio

While digital amplifiers are the DNA of Lyngdorf Audio, loudspeakers are part of the company since its foundation. The Cue-100 is another milestone in Lyngdorf Audio’s speaker history. This high-end audio loudspeaker merges modern Danish design with the latest and best speaker technology. Designed and made at Lyngdorf Audio in Skive, Denmark, the Cue-100 is the perfect loudspeaker for audiophile enthusiasts as well as design-conscious music lovers.

Air Motion Transformer, Kapton foil, Neodymium magnet


18 cm / 6.5-inch Aluminum cone, 39 mm 4-layer copper-clad aluminum voice coil on fiberglass former, Neutral surround geometry, Die-cast vented basket

2 x 18 cm / 6.5-inch passive radiator, Aluminum cone, Neutral surround geometry, Die-cast vented basket

The MP-60 2.1 is an AV amplifier equipped with all the advanced technologies for which Lyngdorf Audio is known, including the renowned room correction system RoomPerfect and the unsurpassed quality in digital signal processing.

16 decoding/up mixing channels, Dolby Atmos®, DTS:X Pro (14 channels), AURO-3D® (14 channels), all legacy codecs

Frequency response: ±0,5dB from 20 to 20,000 Hz, Total harmonic distortion: 0.005% max from 20 to 20,000 Hz

RoomPerfect, Subwoofer level assistant, 32 x adjustable voicing holding ≤8 shelving, high/low pass or parametric filters with adjustable gain and Q

The MH-2 speakers are satellite speakers that can hold their ground on their own, but they are designed to be complemented by one or more high-end subwoofers.

McIntosh

The ML1 Loudspeaker was the first speaker McIntosh ever made. It was introduced in 1970 with a mid-century modern design style and produced amazing sound quality with high volume output capability and tremendous bass response, especially when paired with an external equalizer. Countless music enthusiasts chose the ML1 to listen to their cherished music.

Polypropylene cone and dust cap with synthetic rubber suspension

Low Frequency: Polypropylene cones and dust caps with synthetic rubber suspension

Unit Dimensions (W x H x D)
Speaker: 15″ (38.1cm) x 26-1/8″ (66.4cm) x 13-3/8″ (34cm)
Stand: 16″ (40.6cm) x 10-1/4″ (26cm) x 16″ (40.6cm)

Unit Weight
Speaker: 66 lbs (30 kg)
Stand: 19 lbs (8.6 kg)

Shipping Weight
Speaker: 75.3 lbs (34.2 kg)
Stand: 25.3 lbs (11.5 kg)

Naim

The Naim Mu-so 2nd Generation is Wireless Bluetooth Music System with Apple Airplay 2, Spotify Connect & TIDAL Compatibility.


Streaming: Apple AirPlay 2, Chromecast Built-in, UPnPTM, Spotify® Connect, TIDAL, Roon Ready, Bluetooth, Internet Radio

Digital (S/PDIF): Optical S/PDIF up to 96khz


Typical use: 17W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W

Dual tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

Typical use: 15W
Standby mode: < 2W
Deep sleep (No-network standby mode): < 0.5W


Dual-tone grey and black grille, remote control, mains cables (market dependent), reset pin-hole tool and information booklets.

The ci45 is suited to larger spaces; it has all the features of the ci30 but with greater bass extension and dynamism.

A large on-wall home theatre loudspeaker, featuring four 5" long-throw woofers and a 27mm tweeter. The sub produces additional low-frequencies that the regular ci140 cannot produce. Perfect for home theatre installations and studios. 

The Ci90slim offers the same performance as the Ci30 and Ci45 in a long, slim cabinet. It is the retrofit option, fitting between standard studwork.

The ci30 is the smallest of the range, perfect for in-ceiling, in-wall or on-wall mounting. Ideal for surround channels, Dolby Atmos® and stereo in smaller rooms.

With a second bass driver, the ci65 delivers more bass. It’s ideal for use as a surround speaker in medium-to-large theatres.

The BW-3 is a high bandwidth subwoofer with the objective of reproducing optimal dynamics and precision.

8” long throw driver, Ø 38mm / 1 1/2 in voice coil, cone material: aluminium 

27 to 200 Hz (using line in input), 27 to 800 Hz (using bypass input)

The BW-2 is a high bandwidth active subwoofer with the objective of reproducing music and soundtracks with full dynamics and precision.

10” long throw driver (+/- 15mm/0.6 in), Ø 50mm / 2in voice coil, Cone Material: Deep Anodized aluminium, 86oz / 2.4kg vented magnet

25 to 200 Hz (using line in input), 25 to 800 Hz (using bypass input)

2-way speaker with angled tweeter and front-ported bass reflex