Mark Levinson

The Mark Levinson No 5802 is a integrated amplifier with onboard DAC

The Mark Levinson® № 523 preamplifier is a six-input dual-monaural preamplifier featuring Pure Path circuit design, class-A Pure Phono stage; and configurable balanced, unbalanced, and class-A Main Drive Headphone outputs.

Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path

Discrete, balanced R-2R ladder volume control for precision and performance

Class-A Pure Phono stage with custom configuration for MC and MM cartridge compatibility

Integrated Main Drive fully balanced class-A headphone preamplifier circuitry

Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers

Balanced, single-ended and headphone outputs

The No. 515 is a premium turntable designed and built in collaboration with recognized leader VPI Industries.

First-class analog source designed for the Pure Phono stage found in the № 523, № 526 and № 585.5 preamplifiers

Custom gimbal-mounted, 3D-printed tonearm with integral headshell

Included Ortofon Cadenza Bronze moving coil phono cartridge (№ 515MC only)

Integrated motor-drive electronics, comprising two low-distortion oscillators and a class-AB electronics

Optimised drive system with mechanically isolated enclosure and triple-belt drive

Stainless steel shaft spinning in an inverted phosphor bronze bushing

Precision-machined pulley and triple-belt drive system

Highly damped, vinyl-wrapped MDF and aluminium sandwich main chassis

Machined Delrin and aluminium feet with a vibration-damping polymer core

Platter machined from solid aluminium with an MDF damping layer rotates on an inverted bearing

The Mark Levinson No 585 is a comprehensive and accomplished high-end integrated amplifier.

Pure Path Phono preamp — a discrete design with no op-amps and operates exclusively in class A throughout

High resolution sound from class-A/B amps

Fixed-gain moving magnet (MM) section with 5 capacitive cartridge-loading settings

Moving coil (MC) section with three gain settings and 10 resistive cartridge-loading settings

Ultrasonic filter intelligently compensates for rumble and warping

32-bit/192khz performance, including DSD over PCM via USB 80Hz high-pass option allows proper operation of a 2.1-channel system

Ethernet, RS-232, IR and 12V trigger ports

The Mark Levinson No 5206 is Dual-Monoaural Pre-amplifier.

Pure Path class-A analog signal with two awarded patents

32 Bit/384 kHz Precision Link II DAC with 4x DSD Capability

Class-A high pass subwoofer filterPremium hybrid topography phono stage

Selectable capacitive and resistive load settings

Bluetooth audio input including aptX HD support

Balanced XLR and single-ended RCA outputs

The Mark Levinson № 5805 is a high-quality preamplifier that contains a phono stage and amplifier in one seamless package.

1 x USB 2.0, 1 x coaxial S/PDIF, and 2 x optical S/PDIF

384 kHz/32 bit PCM and DSD 11.2 MHz capability

MQA full decoding on all digital inputs including asynchronous USB

Analog Inputs: 1 x balanced XLR stereo, 2 x RCA stereo, 1 x RCA Phono (MM/MC)

Headphone output: 1 x 1/4-inch/6.35mm jack (front panel)

Speaker outputs: 2 pairs high-current binding posts

The Mark Levinson № 5105 is a premium precision-engineered turntable.

Glass and aluminium front panel feature speed and standby controlsIntegrated bubble level

Optional factory-installed Ortofon moving coil phono cartridge

Fully digital motor electronics with 33/45 speed selections

Handcrafted from a solid, brushed aluminium plinth precision machined from a single billet

14 lb. solid aluminium platter with backside coated in resonance damping material

This 3-in-1 audio player combines a Super Audio CD player, high-resolution network streaming capability and Precision Link II Digital-to-Analog Converter (DAC).

3-in-1 companion source for Nº 5805 or Nº 5802

Featuring adaptive ANC to reduce background noise, the Mark Levinson № 5909 delivers reference-quality sound via 40 mm beryllium-coated drivers and high-resolution Bluetooth 5.1 connectivity.

Digital circuitry compatible with 24-bit/96kHz processing

Expertly tuned 40 mm Beryllium coated drivers acoustically optimized to the HARMAN Curve

Bluetooth 5.1 with LDAC, AAC and aptX™ Adaptive technologies

Adaptive Active Noise Cancellation (ANC) with three modes

Ambient Aware mode for situational awareness while on the go

Four-microphone voice array with Smart Wind Adaption

Available colors include Pearl Black, Ice Pewter, Radiant Red

Premium leather headband and replaceable leather ear cushions

Automotive-grade metallic painted ear cups

Up to 34 hours battery life; 30 hours playtime with ANC enabled

Up to 6 hours playtime with 15-minute quick charge

Mark Levinson No 5302 Power Amplifier is designed to deliver an incredible music experience with great dynamics, deep low ends and low distortion. The 5302 power amp is flexible, powerful and can also be used as a monoblok amp.

Class AB channels: 2 x 135 watts per channel into 8Ω

Power doubles to 270 watts per channel into 4Ω

Easily bridgeable for mono 1 x 550W into 4Ω with a rear-panel switch

The Mark Levinson № 5802  is an integrated amplifier. It includes a premium Precision Link II Digital-to-Analog Converter (DAC) that accurately reproduces audio signals and reduces noise, so you can discover new details in your favourite songs.

Highly capable power supply (500+ VA toroidal transformer)

1x AES, 1x USB 2.0, 2x coaxial S/PDIF and 2x optical S/PDIF

Loudspeaker outputs: 2 pairs high-current binding posts

The Mark Levinson® № 534 dual-monaural amplifier features Pure Path circuit design for a high-current, low-feedback amplifier that delivers 250 watts per channel and operates in pure class A for most listening conditions, doubles down into 4 ohms, and remains stable into 2-ohm loads.

Expansive, fine imaging, extended low frequency response/pitch, and natural high frequencies

Painstakingly optimised little negative feedback, bandwidth, slewing, and open-loop linearity

Fully differential class-AB architecture, operates in class A for most listening conditions

One pair balanced, one pair single-ended inputs

Rated for 250 wpc into 8 ohms, 500 wpc into 4 ohms, with 2-ohm stability

McIntosh

The MC2152 70th Anniversary Vacuum Tube Amplifier is a 150 Watt per channel stereo amplifier.

Unity Coupled Circuit Output Transformers

(8) KT88, (4) 12AX7A and (4) 12AT7 vacuum tubes

Striking new design with carbon fibre side panels

The MC1502 Vacuum Tube Amplifier is a stereo amplifier designed for home audio and home music systems that produces 150 Watts per channel.

The McIntosh MC830 is a 1-Channel Solid State Amplifier that features an open chassis industrial design

Power Guard, Sentry Monitor, Monogrammed Heatsinks, Solid Cinch speaker binding posts

McIntosh MC275 mk VI is a 2 Channel Valve Power Amplifier. 

Naim

The NAIT 5si is Naim's 60W per channel introduction to high-performance integrated amplification.

De-emphasis: ±0.1dB referred to main response

Line Outputs Fixed (level): 2.1V RMS at 1kHz

THD + N: <0.007%, 10Hz - 20kHz at full level

Frequency Response: 10Hz – 20kHz, -0.6dB at 20Hz

9VA (stop mode), 12VA (play mode), 16VA (peak)

NARCOM-5 Remote Control, Standard Interconnect, Power-Line Lite mains cable (UK denominations only)

No 5802

The Mark Levinson No 5802 is a integrated amplifier with onboard DAC(digital inputs only).

The Mark Levinson No 5802 is a integrated amplifier with onboard DAC
(digital inputs only).